Indian Sites for Electronics DIY Tinkerers/Makers to Shop for Tools and Components

[b.life]

I recently purchased some components from schofic.com and their service has been good. They have an amazon store and a brick and mortar store also(I think) and ordering from amazon storefront is costlier then from their own website. They shipped the order promptly but they seem to use amazon shipping who made sure the box is as much damaged as possible but fortunately the items where not damaged.

Website: www.schofic.com

P.S: Their first time user code didn't work for me saying user limit reached even though this was my first purchase, so maybe it is just for show

 

[Rover1312]

I bought a few 21700 batteries from

https://robokits.co.in/

A really good site for original molicel batteries, prices are also considerably cheaper than robu & evalta.

 

[chungus]

Anyone ordered from 3dprintronics? prices are pretty good there for diy 3d printer parts. Please let me if they are genuine

 

[Heisen]

Anyone ordered from 3dprintronics, prices are pretty good there for diy 3d printing parts

They seem legit, check their youtube channel, a shady business won't go this deep to be shady.

3DPrintronics

Found in 2013, 3DPrintronics builds open-source 3D printers, desktop CNC routers, aluminum extrusions, and automation products right here in India. Our main products are - Prusa Series 3D Printers including the latest Prusa Mk4s and Prusa XL Tool Changer, Voron 3D Printer Components, Workbee...

www.youtube.com

 

[chungus]

They seem legit, check their youtube channel, a shady business won't go this deep to be shady.

3DPrintronics

Found in 2013, 3DPrintronics builds open-source 3D printers, desktop CNC routers, aluminum extrusions, and automation products right here in India. Our main products are - Prusa Series 3D Printers including the latest Prusa Mk4s and Prusa XL Tool Changer, Voron 3D Printer Components, Workbee...

www.youtube.com

Thanks man. this is the best thread on this site

 

[rsaeon]

Anyone ordered from 3dprintronics? prices are pretty good there for diy 3d printer parts. Please let me if they are genuine

I bought a bunch of stuff from them over the years. I feel the prices are prices are higher than other places because they exclude GST.

Quality is usually pretty good. One time the custom cut profiles were done pretty bad, but that was just once.

 

[chungus]

I bought a bunch of stuff from them. I felt the prices are prices are higher than other places because they exclude GST.

Quality is usually pretty good. One time the custom cut profiles were done pretty bad, but that was just onc

Can you tell me sites which have better prices, I'm looking for corner plates with t nut for 40x40 extrusion

 

[rsaeon]

For 4040 extrusion, novo3d.in has the best prices. But their 4040 is dual slot, not single, but this means you can user cheaper 2020 hardware and brackets. Also their 4040 measures a little short, at 39mm.

Other places you could try is mechblock and robokits, I've had good experiences with both.

For some offset plates, I designed my own and had it laser cut out of aluminum or steel by robu.in

Everything here was purchased from novo3d, except the 2060, that's from 3dprintronics: https://techenclave.com/threads/diy...nn-elcom-rails-and-aluminum-extrusion.217143/

I built a lot of stuff with extrusions, this is my desk setup with 2060s:

News Post in thread 'Apple Announces Redesigned Mac Mini With M4 and M4 Pro Chips'

Nov 19, 2024

And yet you did not know what you could have changed power button behavior by single command to not shutdown or to ask for confirmation to shutdown. Phew!!! This is serious amount of copium. Like I said, start learning these simple things.

Putting aside your inability to speak to anyone without assuming they're stupid, enlighten me — what is that command? As far as I can find, there is none for a Mac desktop. There's a one-liner terminal command for laptops, but it doesn't work on the mini. Which brings us back to what I said earlier, your observations are out of place as you're...

• rsaeon

• 

News Post in thread 'Apple Announces Redesigned Mac Mini With M4 and M4 Pro Chips'

Nov 19, 2024

Coming to snapping and snipping and restoring, try Moom and BetterTouchTool. RectanglesPro works to an extent. I am using rectangles pro as I am using MBP but it does not have option to bring the arrangement back on reboot. Moom will remember the layout and bring ti back. Not ready to pay for Moom as I already paid for rectnagles and for me, it barely takes a minute to set the arrangement back on reboot (single 32" display).

Thanks. I'll need to try out a few of those, I've been using Magnet for a few years because it has keyboard shortcuts. I usually have multiple windows of the...

• rsaeon

• 
• 

and other random stuff: