PC Peripherals Its confirmed...OCZ Rev2 Plat is TCC5..haha

^^Yo, I thought you decided to keep the DFI for yourself. Now you have a legitimate excuse :P

Yeah, that's the v1.1 on the sticker. Notice that even 4200 is TCC5. And OMG, to think that I was seriously planning on getting it for $240. OhOh ! That would have been some fun.

And the 5000 has always been TCC5, right !
 
LOL ! Someone wakeup Sunny and ask him to get out of town for a few days :ohyeah: !

And Masky go ahead and give it a shot - if you can get to 260 - 275 MHz @ 2.5-3/4-3-6/7 at < 3V, you can rub it back on Sunny :P !
 
When will i get my hands on such ram , god if some one from US helped me get those.
Currently going for Funkies Hynix.

Masky even with this beautiful OCZ u were stuck at 2.5Ghz on ur Venice.
There seems to be no problem with 1:1 OCing but only with DDR333 Divider as funky told to me.

Shift ur Venice to DFI+OCZ and see ur Venice going higher
 
SunMysore said:
:rofl: :rofl: :rofl: :rofl:

hope masky got his TCCD.....
Click to expand...

I aint complaining.. :devil:



TheMask posted 2.43 minutes later:

i must tell u that CPU temp is misleading.. its 45C at full load and the moment i stop priming the temp drops immediately in Smart Guardian..
 
Nice OC Masky :)

DDR 551 :yay:
is tht ur gold vx or rev2.....

Well the threads bout rev2 , but never knw whn its U :devil:

BTW ur ur chipset mite love sme as5 ;)
 
Rockyme2002 said:
Nice OC Masky :)

DDR 551 :yay:
is tht ur gold vx or rev2.....

Well the threads bout rev2 , but never knw whn its U :devil:

BTW ur ur chipset mite love sme as5 ;)
Click to expand...
Obviously rev2. VX would be hard pressed to reach those frequencies and would require 3.7V for it.

Chaos posted 6.15 minutes later:

@rocky: Is arctic silver safe to be put on the nb? I've been wondering the same myself.
 
Last edited by a moderator:
^^ Was jokin :cool2:

@Chaos
Yup, i did it to mine whn i SLI-ed it :ohyeah:
but removing the goup or whtevr thy had thr was 1 looong task.....nd keep arti-clean handy ;)
 
Last edited by a moderator:
Yep.. its the Rev 2 v1.1 TCC5.. its Prime stable at 280MHz too.. same timings.. tested prime for 280MHz and its stable for more than an hour and half.. testing 285MHz now..

and Rockyme, why shud i put some goo on something that aint gonna stick around? :bleh:
 
TheMask said:
Rockyme, why shud i put some goo on something that aint gonna stick around? :bleh:
Click to expand...
Wht did tht mean??? :huh:

u selling tht board :hap5: :S

Said apply as5 cuz ur chipset temps lookd high?? ;)
Nyways 285@ same timings is very good :ohyeah:
 
naa.. me not selling the board.. its already sold.. heheh..unless the buyer wants to back out..

TheMask posted 0.95 minutes later:

may be i'll put AS5 some time during the weekend and check for temps.. as of now the temps that are showing are pretty much lesser that what it was on my A8Ne..
 
bottle said:
what timings and voltage for your ram masky ? and is it 3d stable ?
Click to expand...

280MHz.. pretty stable so far.. 2.5-4-3-7... at 275MHz 2.5-3-3-7, Prime stops after about half hour..

TheMask posted 30.48 minutes later:

small update.. 300MHz 2.5-4-3-7 ran Prime for 21 minutes and then Prime quits.. i was continuing to browse and after about 15 minutes, I got a BSOD..
 
TheMask said:
280MHz.. pretty stable so far.. 2.5-4-3-7... at 275MHz 2.5-3-3-7, Prime stops after about half hour..

TheMask posted 30.48 minutes later:

small update.. 300MHz 2.5-4-3-7 ran Prime for 21 minutes and then Prime quits.. i was continuing to browse and after about 15 minutes, I got a BSOD..
Click to expand...

That's pretty good OC :hap2: ! I'm happy for you and quite relieved that TCC5 is working out quite well. Getting to see a few other similar stories around the net about the new OCZ TCC5 Rev F. So, yep, it's all prolly a matter of binning and how each company goes about it !

Did you manage to locate those 8 shiny tiny traces above the gold connectors :P ?
 
Back
Top