Linksys LN1301 - Group Buy from US

apac said:
In ibhejo, 7.5k should be the cost shipped to India. Woot price is just for shipment within USA I believe.
Click to expand...
Correct, I plan to ship these using Anmol's Freight Forwarder. That is if they work with LN1301s. These are half the price with half the flash and memory with exact same SoC. Great for child nodes.
 
  • Like
Reactions: apac
desi_gamer said:
@kuduku were you able to mesh these with LN1301? Also, are these v1 or v2? v2 has 1GB ram (specs here). Thinking of picking them up for $10 a piece.
Click to expand...
MX 4200 is 512MB RAM only . LN1301 is 2GB RAM . Rest everything is same . I do have 2 x MX4200 and 2 x LN1301 . I had 2 sets for 2 different builds . Had planned 1xLN1301 + 1 x MX4200 for each build . 2GB Ram for routing duties and MX 4200 as node . 2nd Build setup is balance
I have a UCG Ultra as main router so didnt set up all of them . Did install Openwrt on 1 x LN1301 for testing , didnt face any issue with snapshot arix NSS builds . Still using it with latest openwrt Arix build . 1 x LN1301 is still kept sealed pack as received
My MX4200 are in AP mode only . Presently both are connected through LAN and working fine . Triband works fine . Ask me any query u want to know
To your specific query I need to check that , joining Max 4200 and MX4300 in same node / nertwork . That should work as enough reddit thread exists on this specific test

But do remember shipping cost + duty of both is same using Anmol service .

I have named my 2.4G seperately and keeping IOT on it . 5Ghz has 2 bands , 2x2 Wifi6 1.2Gbps and 4x4 Wifi6 2.4Gbps
chetansha said:
Why is it 7500 on inbhejo
Click to expand...
Because thats Amazon link , Send them Woot link on Whatsapp , they might change the price Amazon price - https://www.amazon.com/gp/product/B0CH1KTWPX
desi_gamer said:
@kuduku were you able to mesh these with LN1301? Also, are these v1 or v2? v2 has 1GB ram (specs here). Thinking of picking them up for $10 a piece.
Click to expand...
https://www.reddit.com/r/openwrt/comments/1ehgk2f/us_linksys_ln1301_mx4300_2gb1gb_triband_ax4200
Found it - Ln1301 as master and all Velop can be added as node
apac said:
In ibhejo, 7.5k should be the cost shipped to India. Woot price is just for shipment within USA I believe.

Waiting for @kuduku's response for @desi_gamer's query. I wonder how this Linksys MX4300/MX4200 mesh might perform for something like ~1.5sq ft house, compared against decent(old/used) Asus routers like say Asus RT-AC86U, since those will probably cost just a tiny bit more from ebay.
Click to expand...
@Dushie is running 2 x MX4200 in his house . He is using as dumb AP with his Airtel FTTH modem doing the routing . Once you enable bridge/Ap mode you do lose USB port functionality . I have ppope dialed my FTTH modem using LN1301 with no issues .
 
Last edited:
  • Like
Reactions: desi_gamer, apac and napstersquest
kuduku said:
MX 4200 is 512MB RAM only . LN1301 is 2GB RAM . Rest everything is same . I do have 2 x MX4200 and 2 x LN1301 . I had 2 sets for 2 different builds . Had planned 1xLN1301 + 1 x MX4200 for each build . 2GB Ram for routing duties and MX 4200 as node . 2nd Build setup is balance
I have a UCG Ultra as main router so didnt set up all of them . Did install Openwrt on 1 x LN1301 for testing , didnt face any issue with snapshot arix NSS builds . Still using it with latest openwrt Arix build . 1 x LN1301 is still kept sealed pack as received
My MX4200 are in AP mode only . Presently both are connected through LAN and working fine . Triband works fine . Ask me any query u want to know
To your specific query I need to check that , joining Max 4200 and MX4300 in same node / nertwork . That should work as enough reddit thread exists on this specific test

But do remember shipping cost + duty of both is same using Anmol service .

I have named my 2.4G seperately and keeping IOT on it . 5Ghz has 2 bands , 2x2 Wifi6 1.2Gbps and 4x4 Wifi6 2.4Gbps

Because thats Amazon link , Send them Woot link on Whatsapp , they might change the price Amazon price - https://www.amazon.com/gp/product/B0CH1KTWPX

https://www.reddit.com/r/openwrt/comments/1ehgk2f/us_linksys_ln1301_mx4300_2gb1gb_triband_ax4200
Found it - Ln1301 as master and all Velop can be added as node

@Dushie is running 2 x MX4200 in his house . He is using as dumb AP with his Airtel FTTH modem doing the routing . Once you enable bridge/Ap mode you do lose USB port functionality . I have ppope dialed my FTTH modem using LN1301 with no issues .
Click to expand...

Thanks for such detailed reply. I was under the assumption these are V2 as reported by lots of people on reddit. I too have the LN1301 but the wireguard server with snapshot builds weren't stable for me. I plan to use these as main routers as they have now have stable OpenWRT 24.10 release. Just waiting for the LN1301 to have a stable release as well. Then I'll go your way...
 
And for those who are already using any in stock Linksys - https://xxx.xxx.xxx.xxx/sysinfo.cgi shows you detailed info including uboot , wifi channel , memory etc ...
desi_gamer said:
Thanks for such detailed reply. I was under the assumption these are V2 as reported by lots of people on reddit. I too have the LN1301 but the wireguard server with snapshot builds weren't stable for me. I plan to use these as main routers as they have now have stable OpenWRT 24.10 release. Just waiting for the LN1301 to have a stable release as well. Then I'll go your way...
Click to expand...
Did you try this apk NSS builds from Arix - https://github.com/arix00/openwrt-mx4300/releases
github.com

Release qualcommax-nss-snapshot-r28780-4b6886d9fd · arix00/openwrt-mx4300

APK package manager kernel - 6.6.74 sha256sum 2597b271db053cbbd5f8fd3ab009aeb318b8dc2a7b704230084e532cf68506b1 fullconfig.buildinfo 05f43aff79495f85e31ba8aa9b30c612482cc0495be1d5f3bb958c87cf7d756...
github.com github.com
desi_gamer said:
@kuduku were you able to mesh these with LN1301? Also, are these v1 or v2? v2 has 1GB ram (specs here). Thinking of picking them up for $10 a piece.
Click to expand...
my ibhejo MX 4200 is exact same as being sold on woot . Check Pics
 

Attachments

  • 20250210_224514.jpg
    20250210_224514.jpg
    531 KB · Views: 20
  • 20250210_224503.jpg
    20250210_224503.jpg
    554.7 KB · Views: 20
Last edited:
  • Like
Reactions: desi_gamer, ibose and invisiblebond
kuduku said:
Did you try this apk NSS builds from Arix - https://github.com/arix00/openwrt-mx4300/releases
github.com

Release qualcommax-nss-snapshot-r28780-4b6886d9fd · arix00/openwrt-mx4300

APK package manager kernel - 6.6.74 sha256sum 2597b271db053cbbd5f8fd3ab009aeb318b8dc2a7b704230084e532cf68506b1 fullconfig.buildinfo 05f43aff79495f85e31ba8aa9b30c612482cc0495be1d5f3bb958c87cf7d756...
github.com github.com
Click to expand...
Yes, it worked fine locally. The problem was when you'd try to remote into it, for which I've traditionally used wireguard through DDNS. It just refused to work and I had to give up eventually.
kuduku said:
my ibhejo MX 4200 is exact same as being sold on woot . Check Pics
Click to expand...
Thanks again for the pics. These must be V1 then. Still good for child nodes ig.
 
Last edited:
You must log in or register to reply here.
Top Bottom