Hi,
I just assembled my system now and am getting very high temperatures in the bios:-

IMG_0176 by geekgamer_27, on Flickr
The above temperatures are with the side panel opened with the side panel shut, I get readings of 53 Degrees system temperature and 54 degrees cpu temperature. I just assembled the system about 20 mins back and powered it up and have left it running in the bios.
This is the setup:-

IMG_0178 by geekgamer_27, on Flickr

IMG_0180 by geekgamer_27, on Flickr
The thermal paste used is Tuniq TX 2 which is a year old. The heatsink used it Coolermaster TX -3 with a 92mm Blademaster fan. The config is as follows:
AMD Phenom 2 X4 955 BE - non overclocked
Gigabyte GA-785GMT -USB 3
2Gb DDR 3 OCZ Platinum at 1600Mhz (Manually changed speed from 1066 to 1600Mhz in the bios and rebooted and have been on the bios ever since)
Gigabyte Luxo M 142 cabinet with a 2x 120 MM fans - coolermaster and gigabyte's own fan
Corsair VX 550 psu
Nvidia 8800Gt 512mb
3 hdds
My Room temperature is 31 Degrees Celsius. There is no AC in my room.
I am getting Artic MX 2 paste and G-Skill Rip jaws 2x2 =4Gb DDR3 1600 Mhz tomorrow. The temps with the stock heatsink when i tested the system 2 days back was 33-37 degrees and that was in the bios. I have installed the OS yet.
Any suggestions?
I just assembled my system now and am getting very high temperatures in the bios:-

IMG_0176 by geekgamer_27, on Flickr
The above temperatures are with the side panel opened with the side panel shut, I get readings of 53 Degrees system temperature and 54 degrees cpu temperature. I just assembled the system about 20 mins back and powered it up and have left it running in the bios.
This is the setup:-

IMG_0178 by geekgamer_27, on Flickr

IMG_0180 by geekgamer_27, on Flickr
The thermal paste used is Tuniq TX 2 which is a year old. The heatsink used it Coolermaster TX -3 with a 92mm Blademaster fan. The config is as follows:
AMD Phenom 2 X4 955 BE - non overclocked
Gigabyte GA-785GMT -USB 3
2Gb DDR 3 OCZ Platinum at 1600Mhz (Manually changed speed from 1066 to 1600Mhz in the bios and rebooted and have been on the bios ever since)
Gigabyte Luxo M 142 cabinet with a 2x 120 MM fans - coolermaster and gigabyte's own fan
Corsair VX 550 psu
Nvidia 8800Gt 512mb
3 hdds
My Room temperature is 31 Degrees Celsius. There is no AC in my room.
I am getting Artic MX 2 paste and G-Skill Rip jaws 2x2 =4Gb DDR3 1600 Mhz tomorrow. The temps with the stock heatsink when i tested the system 2 days back was 33-37 degrees and that was in the bios. I have installed the OS yet.
Any suggestions?