Which among these is the best program to check PC stability. Most people use Prime95 but while going through a thread at XtremeSystem I found that OCCT is better. OCCT, in fact catches errors faster. Most people there said a 2 hour OCCT-stable system is similar to 24 hour prime stable system.
New OCCT also has:
I, on the other hand, have only used Orthos so far :ashamed:
New OCCT also has:
OCCT Perestroika - 3.0.0.b04 released ! Stable : 2.0.1 - XtremeSystems Forums* CPU OCCT : The classical OCCT CPU tests. The modes "CPU, RAM, and Mix" have been renamed to match more closely their roles to "Low, Medium and Large data sets".
* Linpack : The very same test that Intel Burn Test, based on an Intel library, that will make your CPU hotter than never before.
* GPU 3D : OCCT GPU, a home-made 3d program that will make your GPU hotter than anything else (even furmark), and sports an error-checking mode just as ATITool.
* GPU Memtest : A GPU memory memtest based on CUDA. Very useful as well, but in practice, it is better at detecting manufacturing errors, and not overclocking errors.
* Power Supply : This test is actually Linpack combined with OCCT GPU. It aims at loading your power supply, and results shows that it uses 20% more power than Crysis and 25% than 3dmark BEWARE, THIS TEST IS REALLY HARD ON YOUR POWER SUPPLY, IT COULD MELT IT EASILY ! DO NOT USE IT IF YOU HAVE A "NO NAME" POWER SUPPLY !
I, on the other hand, have only used Orthos so far :ashamed: