Storage Solutions Orico J-10 SSD

Where did you find the speed drops to 100 MBps after using the SLC?

View attachment 227138

Also, in this video you can see the speed falling after copying 200-300 GB. However, he is doing it on an empty drive. Once it is more than half full, the cache size keeps reducing until it falls faster to the actual NAND speed.

It's better/faster cousin O7000 post cache speed is 50-60MB/s so don't expect this ssd to have 100MB/s post cache speed. In fact if you look at that video carefully you can see the speeds dropping to even 15-20MB/s which is what should be expected on these drives where post cache avg speeds drop down to 50-60MB/s.
 
It's better/faster cousin O7000 post cache speed is 50-60MB/s so don't expect this ssd to have 100MB/s post cache speed. In fact if you look at that video carefully you can see the speeds dropping to even 15-20MB/s which is what should be expected on these drives where post cache avg speeds drop down to 50-60MB/s.
Wasn’t that a momentary drop though? You can see the graph hovering around 150MBps.

Also, all SLC SSDs drop to such speeds after cache is full. If your usecase requires >500MBps write speed always, why not look into TLC?

What you are describing is SLC SSD behaviour. Got nothing to do with this particular SSD.
 
  • Like
Reactions: DigitalDude