PC Cabinet - Powder coat - bangalore - where?

Status
Not open for further replies.
H

Haddock

Contributor
Hi guys, I want to Powder Coat my 2007 Zebronics Antibiotic cabinet.

Both outside & inside to black matte finish.

Also two 26" Aluminium pieces with same colour :D

Can you guys point out a reputed + economical + quality powder coater at Bangalore :)

And, before the powder coating, i want to cut a metal piece behind the CPU, for CPU removal w/o taking out motherboard (like latest cabby's), where to get that done from? :D
 
Got it done sometime back from one guy in Bamboo Bazaar, near to Coles park/Shivajinagar. But remember these guys do not clean the cabby or anything. So you have to do all the prep work yourself. Cutting of the back hole, i dont know.

BTW, if you dont clean the cabby properly, then be prepared to have a screwed up job, with lots of bubbles.
 
mav2000 said:
Got it done sometime back from one guy in Bamboo Bazaar, near to Coles park/Shivajinagar. But remember these guys do not clean the cabby or anything. So you have to do all the prep work yourself. Cutting of the back hole, i dont know.

BTW, if you dont clean the cabby properly, then be prepared to have a screwed up job, with lots of bubbles.
Click to expand...
you got your already awesome cabby powder coated? :O why? :P

anyways, thats an awesome cabby+mod you got. ;)

how much did it cost for you (powder coat)?

btw, my cabby is fine, only few scratches on top, thanks to my bros, they used to put notebooks/dvds/other plastic craps on top.

now it sits at knee level in PC table :P

I'm more interested about the inside for powder coating.

what did you mean by cleaning?
remove present coat?
i thought, the shop waala will sand blast clean 'em.
at first i was thinking about removing the HDD bays & reinstall them in transverse position, but the cabby's width itself is around 7inches only. :(

--- Updated Post - Automerged ---

--------------
googled the pic
dsc04382azs4.jpg
 
^get it sanblasted first or take a sand paper and remove the first coat.
As iyengar suggested lots of ppl do powdercoating around Bangalore (south?)
If you need a specific address pm me....

Cost: 500Rs-1000Rs including sandblasting etc
Specialized treatment will cost double of that.

And of course there is airbrushing which will cost 5k+

Cutting holes:
1.LASER cutting:2k+....superb precesion
2.holesaw/drill....DIY
3.take the cabinet to an engineering workshop(Industrial areas)...they can punch holes or use a chisel.

my stacker interiors is powdercoated....chk out FS threads here or E forum gallery
 
Audiophi1le said:
^get it sanblasted first or take a sand paper and remove the first coat.
As iyengar suggested lots of ppl do powdercoating around Bangalore (south?)
If you need a specific address pm me....
Click to expand...
thanks man, i'll PM you after some local inquiries at KGF :D

Cost: 500Rs-1000Rs including sandblasting etc
Specialized treatment will cost double of that.
Click to expand...
1k is good
btw, whats Specialized treatment?
higher quality powder coating or higher quality 'after' treatment?

And of course there is airbrushing which will cost 5k+
Click to expand...
i dont need this one :D, but thanks for price info

Cutting holes:
1.LASER cutting:2k+....superb precesion
2.holesaw/drill....DIY
3.take the cabinet to an engineering workshop(Industrial areas)...they can punch holes or use a chisel.

my stacker interiors is powdercoated....chk out FS threads here or E forum gallery
Click to expand...
I'll go for option# 2 or 3 :D
 
Status
Not open for further replies.
Top Bottom