Post your overclocks !

Nice OC Funky ... here's what I could manage

X2 3600+ Brisbane with Kingston 667 RAM
Motherboard :Asus M2N MX
Stock speed : 1900Mhz
Oced Speeds : 2509Mhz
Vcore : 1.31v (Auto)
Ram : 716Mhz at 4-4-4-12
Cooler : Stock



The temps are a bit high cause I hadn't connected the case and hdd fans :)
 
been tweaking system for a month... this what I ended up with

Dual core e4300
Stock speed 1.8 ghz
2gb ocz
Evga 680i
Zalman 9500
antec 900 case

oc speed 3.01 ghz
vcore 1.29

temps
idle btwn 36-39c
load btwn 45-50

 
I finally got my 3200+ to 2.57Ghz (2.02 stock) with RAM @ DDR266 (around 333 effective I think) 990 cpu score 3dmark06

Pics are on home computer WHICH STILL DOESN'T GET INTERNET!

I'm always amazed at the ocs on c2ds
 
Just some dry runs....will do more stress testing overnight

X2 3600+ Brisbane with Transcend DDr2 667(old D9 chips)

Motherboard :Biostar TA690G

Stock speed : 1900Mhz

Oced Speeds : 2850Mhz( 300 X9.5)--- 50% OC Achieved

Vcore : 1.42v (+0.150 set in BIOS)

Ram : 814 Mhz at 4-4-4-12@2T

Cooler : Stock



 
This is what I reach with my 450 Watts SPMS :( any above and Pi test gives Hardware faliur Blue Screen halt...

FSB 1450 ... RAM 750 ... vcore 1.32 .. Rest all Auto !!

E6600 / P5N-E SLi / 2 GB DDR-II 667 MHz

pcxy3.jpg
 
well i guess with Quads coming, this thread is gonna liven up again, so ill cheekily post my TP OC and get some limelight :lol:



Volts pushed = 2.02, measured with a DMM

unfortunately, i managed to break the solder of my voltmod while removing the gfx card so cant push any more vdimm, will resolder when i get a new cabinet sometime this week
 
Now since this thread has been bumped and Rave wants all the limelight, i think i will steal some of it from him....RAM is same as yours Rave, a GSkill PC6400 800Mhz running @ hold your breath, its running @ 1217Mhz 5-5-5-15 !!! :ohyeah: :ohyeah: :ohyeah: :ohyeah:
 

Attachments

  • 3.3 Stable1217.jpg
    3.3 Stable1217.jpg
    228.4 KB · Views: 274
thebanik said:
Now since this thread has been bumped and Rave wants all the limelight, i think i will steal some of it from him....RAM is same as yours Rave, a GSkill PC6400 800Mhz running @ hold your breath, its running @ 1217Mhz 5-5-5-15 !!! :ohyeah: :ohyeah: :ohyeah: :ohyeah:

nice man, howmuch vdimm does it require though?
 
Rave said:
nice man, howmuch vdimm does it require though?

Now thats something i seriously do not want to answer....:ohyeah: it will scare many people....passing 2.35Volts through BIOS, though my mobo has a habit of undervolting bigtime and do not have DMM to measure the actual volts. I havent tried running any stability test @ those settings ...Its doing great with 2.1V, running @ 1150Mhz 5-5-5-15, completed super pi 32M and ran memtest for 45min. without any errors.
 
thebanik said:
Now thats something i seriously do not want to answer....:ohyeah: it will scare many people....passing 2.35Volts through BIOS, though my mobo has a habit of undervolting bigtime and do not have DMM to measure the actual volts. I havent tried running any stability test @ those settings ...Its doing great with 2.1V, running @ 1150Mhz 5-5-5-15, completed super pi 32M and ran memtest for 45min. without any errors.

well, keep a tab on the temps then if ure gonna push 2.3v, for testing and benching its alright but not for long term use as u may already know

as for me, i dont think i can test anymore untill i get a new psu and redo that solder, currently on a microtek 400w psu hehe
 
^^^^with that PSU it may end up as suicide if you try to overclock anything...here is another screenshot to look at with new memory frequency..624x2= 1248Mhz @ 5-5-5-15.

E4300 @ 3.52 Ghz
 

Attachments

  • 3.52 Stable1231-2.JPG
    3.52 Stable1231-2.JPG
    205.9 KB · Views: 259
Back
Top