AT&T Pantech Burst Pantech Burst, 1.5Ghz Dual core, 1GB RAM, 16GB memory, 5 MP

veer_singh said:
be very careful , while inserting micro sim with the adaptor to the normal sim card slot holders , because many people while removing the sim , they have broken the golden pins .
if your sim card comes out the adaptor remains in the same place , do insert the micro sim gently and remove the whole set .

I would suggest you apply for a duplicate sim card if you are moving from micro sim to normal sim for a while .
dont do adaptor sh**
Click to expand...


What I do is I put a drop of adhesive (fevicol/ dendrite etc) and then put the micro SIM in the adapter. That way there is no way of getting the sim detached from the adapter. But if you need to remove the SIM frequently it will better to go for new full sized SIM.

kuduku said:
sandeepsachin This version of android never has 2G/3G toggle . I use https://play.google.com/store/apps/details?id=de.mangelow.network works beautifully
Click to expand...
Actually you wouldn't have the 2G/3G toggle in any phones running stock AT&T firmware. They disable it so that you must use 3G/LTE. The app that you mentioned may work. Also, you can try *#2263# and select the GSM band there. Again this may not work with all AT&T phones as in some firmwares the radio modem is locked and you can't switch 2G/3G in any way. In these cases even you change the selection you'll see that it'll revert back to 3G/WCDMA or LTE after reboot. You need RAT unlocked radio modem to do so which will be available in custom ROMs.
 
Suggestion: can we start a new thread in mobiles related to the pantech burst troubleshooting, rooting, aps, etc? this thread will become mixed up after a while with people wanting to buy posting and people answering questions related to troubleshooting posting and it would be troublesome finding answers.
@kuduku, @veer_singh, @tech.addict, or anyone who has the phone please do the honors.
 
Last edited by a moderator:
6pack said:
Suggestion: can we start a new thread in mobiles related to the pantech burst troubleshooting, rooting, aps, etc? this thread will become mixed up after a while with people wanting to buy posting and people answering questions related to troubleshooting posting and it would be troublesome finding answers.
kuduku, veer_singh, tech.addict, or anyone who has the phone please do the honors.
Click to expand...
Ok will make it by evening if no one else makes it , busy in afterenoon
 
I would like to know the dev support for the phone. Seems can be rooted but whats the condition when it comes to custom roms?
 
6pack said:
Suggestion: can we start a new thread in mobiles related to the pantech burst troubleshooting, rooting, aps, etc? this thread will become mixed up after a while with people wanting to buy posting and people answering questions related to troubleshooting posting and it would be troublesome finding answers.
kuduku, veer_singh, tech.addict, or anyone who has the phone please do the honors.
Click to expand...

kuduku said:
Ok will make it by evening if no one else makes it , busy in afterenoon
Click to expand...

DONE :
AT&T Pantech Burst [ Discussion Thread ]
 
My back capacitive button stopped working , rest 3 are working but too much lag or pressure required like yesterday to make them work . I have put xtremeguard screen guard so will wait for it to dry till i contact ICC . Might start working back
 
kuduku said:
My back capacitive button stopped working , rest 3 are working but too much lag or pressure required like yesterday to make them work . I have put xtremeguard screen guard so will wait for it to dry till i contact ICC . Might start working back
Click to expand...

xtremeguard means ? spraying liquid and settling the sheet ? Not like the normal screen protectors ? More like zagg
 
veer_singh said:
chances of water damage is more :(
Click to expand...
Nopes , i didint dip in water , just applied a screen guard , lets see by evening screen guard is drying . If still doesnt work will reset it than see what happens . It didnt have a battery , was not switched on during application so i see no chances of water damage
 
kuduku said:
Nopes , i didint dip in water , just applied a screen guard , lets see by evening screen guard is drying . If still doesnt work will reset it than see what happens . It didnt have a battery , was not switched on during application so i see no chances of water damage
Click to expand...

for fast drying dip the phone in a bag of rice , coz rice absorbs moisture .
 
Guys working now , was under table lamp whole time . Has dried completely , screen guard set completely and i am happy with my results . These screen guard types take time and effort but quality is very good . The feel and overall finish with protection is nice . I am not comparing Zagg and others but overall these give nice protection
 
kuduku said:
Guys working now , was under table lamp whole time . Has dried completely , screen guard set completely and i am happy with my results . These screen guard types take time and effort but quality is very good . The feel and overall finish with protection is nice . I am not comparing Zagg and others but overall these give nice protection
Click to expand...

Happy to hear that your back button is working .
 
kuduku said:
Guys working now , was under table lamp whole time . Has dried completely , screen guard set completely and i am happy with my results . These screen guard types take time and effort but quality is very good . The feel and overall finish with protection is nice . I am not comparing Zagg and others but overall these give nice protection
Click to expand...

How long did it take for you to receive this skin after ordering?
 
Back
Top