i saw Ant esports Box C, but seems to have air flow issues and might need a sfx PSU.
If I don't get hands on a Z20 clone i might have to go with this.
OC & Modding All things SFF
- Thread starter immolationepoch
- Start date
If I don't get hands on a Z20 clone i might have to go with this.
awestorr
Level G
Zeb woodan shouldnt have any airflow issue and you can even use an atx psu if u already own one.
Worst case if u have multiple hdd, you may have to let go of couple front headers.
And honestly its build quality is way better than my old cooler master case while costing 4600 on amazon sales.
tag me if you find Z20 clone
Do you get ~400-500MB/s speeds on that type c adapter?
awestorr
Level G
I have a sata ssd, i get around 250-300 which is the same i get without adapter.
But you can check the reviews and see what they say.
tech.monk
Level G
CH160?
tech.monk
Level G
It is ITX only - I have R5 3600 + B550i installed in it - no space to fit in the mATX (unless you have MB's similar to H470M-HDV or H370M-HDV - which are difficult to find it in India)
Please update here how everything goes, how much including shipping, I am assuming there will customs too.
I am eyeing Dan A3 but worried RTX 3080 FE temps will suffer, my city gets way to hot in summer. Plus even if I manage to fit two fans at the bottom fan cables will make a mess with ATX psu, any case MATX case recommendations?
Last edited:
enc0dex264
Level E
3080 FE has a really bad cooler design.. and gets really hot.. you need a high airflow case for sure for it.
Hi everyone, I started a new thread about building in fractal terra. Didn’t post here thinking it might need separate discussion, but here’s the link:
https://techenclave.com/threads/no-compromise-air-cooled-itx-under-10l-fractal-terra.222567/
https://techenclave.com/threads/no-compromise-air-cooled-itx-under-10l-fractal-terra.222567/
kalph09
Level F
Not sure of this was shared before. Anyone planning a SFF build can now refer this site for various cases and it's information.
www.sffready.com
SFF Ready?
www.sffready.com
Received it today after 40 days, looks awesome, Total 10k. Bit expensive but love the look and form factor
Attachments
marsweeed
Level D
sexy thing man. love it.
did you order it directly from alibaba? are they delivering here now?
?dOuBtFiRe?
Level F
Please do post cabinet model name and version, link & import process including customs.
The color is amazing.
cabinet is this one : https://www.jonsbo.com/en/products/Z20Black.html
alibaba supplier will deliver but delivery is expensive, i had to use freight forwarder service. They shipped it by sea and handled the customs and last mile delivery.
alibaba supplier will deliver but delivery is expensive, i had to use freight forwarder service. They shipped it by sea and handled the customs and last mile delivery.
?dOuBtFiRe?
Level F
What was the total cost, if possible breakup. Also links to Freight Forwarder Service.
5k + 5k
forwarder - https://x.alibaba.com/xK11HHn?ck=minisite
case - https://m.alibaba.com/x/xaWLvWn?ck=pdp
?dOuBtFiRe?
Level F
Thats great purchase. Many thanks for the input.
kalph09
Level F
Folks, I have some question on fan placement for my CH160.
The fans (arctic p12) are all exhaust creating a negative pressure inside, while the temps are fine. Its causing a lot of dust accumulation.
Am unable to mount the fan at the front as its suited for a slim profile fan only nor I have room for any DIY to tie down the fan. I have to install them as shown below.
My questions are.
1. Can I use top fans(both) as intake or its a bad idea? or use just one (top left) as intake?
2. What other options I can try?
P.S ignore the fan lighting, I had not daisy chained the RGB cables.
The fans (arctic p12) are all exhaust creating a negative pressure inside, while the temps are fine. Its causing a lot of dust accumulation.
Am unable to mount the fan at the front as its suited for a slim profile fan only nor I have room for any DIY to tie down the fan. I have to install them as shown below.
My questions are.
1. Can I use top fans(both) as intake or its a bad idea? or use just one (top left) as intake?
2. What other options I can try?
P.S ignore the fan lighting, I had not daisy chained the RGB cables.