Linksys LN1301 - Group Buy from US

smnrock said:
If you are planning for mikrotik, then consider this model too as you dont need WIFI, https://mikrotik.com/product/hex_2024

It has ARM processor.
Click to expand...

This is really cool, I wish they refreshed the hex s too.

Looks like the new hex refresh is already available in India - https://fgtechstore.com/product/mikrotik-e50ug-the-classic-hex-refresh/

kuduku said:
Doesnt RouterOS has a difficult learning curve ?
Click to expand...

It's a bit different, yes, but once you get familiarised a bit, it is pretty straight forward. I think its worth a try.
 
  • Like
Reactions: smnrock
MrGordon said:
This is really cool, I wish they refreshed the hex s too.



It's a bit different, yes, but once you get familiarised a bit, it is pretty straight forward. I think its worth a try.
Click to expand...
i purchased BSNL WIMAX device which i still have . They were those proprietary Mikrotik devices - MikroTik SXTsq Lite5
One tab was Google and youtube to check and another tab was the router admin page . BSNL that time was as shit as now so any chnage was a task in itself
So not inclined for Router OS
 
  • Like
Reactions: MrGordon
tr27 said:
Consider me a noob in this, why would you want to get this over the wirless? (Apart from openwrt and wired being more reliable and faster)
Click to expand...
People go for seperate boxes for each service instead of All in1 Fibre modem which also does routing and WiFi . It gives them better control like VLAN , DHCP reservation with rules , firewalls
Everytime all these All in 1 devices are always shitty and underperfrom in all services . They are fine for normal user who wont come to know but for a power user or anyone running a homelab differentiation in servies is must
You would start with a good FTTH modem/ONT then a decent router to dial PPPOE , handle routing with VLANs , link aggregation , DUAL WAN etc . Your router could also be a server for running /openwrt / pfsense /docker / Adguard etc (no 8 port router costs less than 12k so one gets 4/5 port router - add a switch , 12/24 port switch which shares your wired conenction , Switch could be unmanaged or managed ( L1/L2/L3) . Again managed could run VLAN etc which costs over 15k - Now most important segement WIFI routers/AP , All those go for above setup use their Wifi routers as dumb AP and utilize them for what they build for - In between you also add a LINUX server which runs all your services like ADGUARD / DOCKER / PLEX/ JELLYFIN / Home Assistant etc - control all IOT

Above all improves thorughtput , reliability , control , security and peace of mind
Thats the best layman expanation i could give being myself a layman in this

Basically all the above are kinks of bored people who can spend moolah on all this and then spend more to have the latest tech , spend sleepless nights to configure them , prowl techenclave/reddit after midnight to share ideas and ask queries etc . :p:p;)
 
  • Like
  • Love
Reactions: rsaeon, tr27, cisco_tech and 2 others
Finally got my package delivery today from ibhejo. Unboxing is done. Now to set these up.
External Usb storage connected and working with the router.
WhatsApp Image 2024-11-23 at 5.54.34 PM.jpeg
 

Attachments

  • IMG_20241123_163122584.jpg
    IMG_20241123_163122584.jpg
    160.5 KB · Views: 57
  • IMG_20241123_163129437.jpg
    IMG_20241123_163129437.jpg
    181 KB · Views: 57
Last edited:
  • Like
Reactions: cisco_tech, m0h1t, kuduku and 2 others
Dushie said:
External Usb storage connected and working with the router.
Click to expand...
Interesting. Everyone was saying the USB port wasn't functional. I was using it to power my RPI, but it's good to know it works for storage as well.
 
Grease Monk said:
Interesting. Everyone was saying the USB port wasn't functional. I was using it to power my RPI, but it's good to know it works for storage as well.
Click to expand...
I am not using LN1301, but MX4200C which is another version of it sold by Costco. This comes with default firmware in which everything works out of the box, no need to tinker around with anything. Setup was pretty easy too. Connected the first one via ethernet to my airtel router, then used the Linksys app and set it up , connected node to the first one via ethernet and everything was completed via app. Then just removed the node assigned static ip to both on airtel router and moved the first one to bridge mode. Now both are working fine as Access point in wired backhaul forming a mesh and are directly connected to the airtel router via ethernet backhaul . Also in Bridge mode the USB option does not work and interface and acess is limited.
 
Last edited:
  • Like
Reactions: Grease Monk
Dushie said:
I am not using LN1301, but MX4200C which is another version of it sold by Costco. This comes with default firmware in which everything works out of the box, no need to tinker around with anything. Setup was pretty easy too. Connected the first one via ethernet to my airtel router, then used the Linksys app and set it up , connected node to the first one via ethernet and everything was completed via app. Then just removed the node assigned static ip to both on airtel router and moved the first one to bridge mode. Now both are working fine as Access point in wired backhaul forming a mesh and are directly connected to the airtel router via ethernet backhaul . Also in Bridge mode the USB option does not work and interface and acess is limited.
Click to expand...
MX 4200 or MX 4200 C are same , both are v1 with 512MB RAM . V2 has 1GB RAM
Exact same as LN1301 except RAM , which as 2GB
 
  • Like
Reactions: tapestry and Dushie
If the internals are exactly the same with the only difference being the RAM, then I'm surprised no one has reported trying the MX4200 firmware on the LN1301.
 
Grease Monk said:
If the internals are exactly the same with the only difference being the RAM, then I'm surprised no one has reported trying the MX4200 firmware on the LN1301.
Click to expand...
Sharng the link for firmware :

MX4200, MX4200C, MX8000, MX8400C, MX12600 Downloads, Documents, and User Guide

This article lists the Downloads, Documents, and User Guide for the Linksys MX4200, MX4200C, MX8000, MX8400C, and MX12600
support.linksys.com support.linksys.com

Version 1.0 is what i have details below.

Ver. 1.0.13.210200​

Latest Date: 09/14/2022​

Download 36.1 MB​


Release notes for details :

Also post all my research, the most stable firmware with positive feedback is V1.04 incase you face issues. Downgrade to that and it works great. Plenty of feedbacks from users still using this 1.04 one .
Firmware version: v1.0.4.203508
Release date: December 10, 2020

Only downside is this does not support apple home kit and may not have all the latest fixes.
I am still on the 1.0.13 not faced any issues till now running it in bridge mode .
Did lot of research, hence sharing the same. Will always recommend to backup your existing firmware before making any changes or trying different firmwares, so you do not brick your router.
 
  • Like
Reactions: kuduku, Grease Monk and tapestry
Lol, I'm definitely not brave enough to risk bricking my router. I meant on the reddit threads where folks are discussing the LN1301 and talking about ddwrt/openwrt
ibose said:
Please try it out and share your feedback here.
Click to expand...
 
ibose said:
Stock firmware is different in that, for this, it does not allow usage of the USB3 slot unless I am mistaken.
Click to expand...
yes doesnt work on Fortnite firmware . probably works on ISP firmware
Dushie said:
Sharng the link for firmware :

MX4200, MX4200C, MX8000, MX8400C, MX12600 Downloads, Documents, and User Guide

This article lists the Downloads, Documents, and User Guide for the Linksys MX4200, MX4200C, MX8000, MX8400C, and MX12600
support.linksys.com support.linksys.com

Version 1.0 is what i have details below.

Ver. 1.0.13.210200​

Latest Date: 09/14/2022​

Download 36.1 MB​


Release notes for details :

Also post all my research, the most stable firmware with positive feedback is V1.04 incase you face issues. Downgrade to that and it works great. Plenty of feedbacks from users still using this 1.04 one .
Firmware version: v1.0.4.203508
Release date: December 10, 2020

Only downside is this does not support apple home kit and may not have all the latest fixes.
I am still on the 1.0.13 not faced any issues till now running it in bridge mode .
Did lot of research, hence sharing the same. Will always recommend to backup your existing firmware before making any changes or trying different firmwares, so you do not brick your router.
Click to expand...
Apple Homekit fimrware blocked seperate band for itself thus screwing up all other devices .
 
kuduku said:
Basically all the above are kinks of bored people who can spend moolah on all this and then spend more to have the latest tech , spend sleepless nights to configure them , prowl techenclave/reddit after midnight to share ideas and ask queries etc . :p:p;)
Click to expand...
You missed one important part:
Also spend hours trying to debug the issues when their devices show Connected, No Internet and family members call you in the middle of the office hours saying internet isn't working!
 
  • Like
  • Haha
  • Wow
Reactions: rsaeon, invisiblebond, anmolbhard004 and 5 others
napstersquest said:
You missed one important part:
Also spend hours trying to debug the issues when their devices show Connected, No Internet and family members call you in the middle of the office hours saying internet isn't working!
Click to expand...
yup yup, while openwrt is feature rich, the current snapshot release is really not stable. 24.10, the next stable release is atleast a few months away if not more
 
Last edited:
  • Like
Reactions: MrGordon
Anyone using this in bridge mode? Is it working fine?

I'm having a strange issue.. whenever internet is up after down for sometime, this router does not work in bridge mode, keep saying no internet. Only way to restore internet is, login to router admin page, set to DHCP mode, wait for settings to take effect Then again change back to bridge mode and save. Then its working fine.
 
smnrock said:
Anyone using this in bridge mode? Is it working fine?

I'm having a strange issue.. whenever internet is up after down for sometime, this router does not work in bridge mode, keep saying no internet. Only way to restore internet is, login to router admin page, set to DHCP mode, wait for settings to take effect Then again change back to bridge mode and save. Then its working fine.
Click to expand...
@Dushie using in bridge mode
 
You must log in or register to reply here.
Top Bottom