Asus RT-N13U B1 - DD-wrt thread

Abhishek Nama said:
I want to thank @nick2012, @Chaoseater for their suggestions and tips but mainly I would like to thank @prasanna3k for configuring optware and transmission, there was a problem after configuring, but he was kind enough take more time out of his schedule to fix it.

I also want to thank @dinjo for writing this guide which is much more intuitive than the the official ddwrt guide :)
Click to expand...

Welcome to N13 Download gang :)
 
Last edited by a moderator:
nick2012 said:
Why someone need a video in installing transmission??
I think dinjo done a great job making this guide...
If a noob like me installed successfully anybody can:p
Click to expand...
I didn't say dinjo's guide is not useful.
I am also noob in this, I cant able to installing the transmission successfully. I expecting some help, Already prasanna says to help on this through teamviewer.
By the way, i found this on youtube, thats why i posted here. Is there any harm?
 
dinjo said:
Code: 
screen -S wget httplink
or use
Code: 
nohup wget httplink &
Click to expand...
bro not working :(
Code: 
root@mtnl:~# screen -S wget http://www.xdaservices.com/Files/Wanamlite/GT-I9300_
WanamLite.ZSEMC1.V6.3.NO-WIPE%20.zip
-sh: screen: not found
root@mtnl:~# nohup wget http://www.xdaservices.com/Files/Wanamlite/GT-I9300_Wana
mLite.ZSEMC1.V6.3.NO-WIPE%20.zip
-sh: nohup: not found
 
dinjo said:
Simple logic

Code: 
ipkg install nohup
ipkg install screen
Click to expand...
:happy: again thanks
whats this with nohup
Code: 
 ipkg install nohup
Nothing to be done
An error ocurred, return value: 4.
Collected errors:
Cannot find package nohup.
Check the spelling or perhaps run 'ipkg update'
 
Actually i cant understand how nohup is missing from it it should not be but screen should do the job for you.
 
Code: 
mkdir /tmp/etc/config #Create a dir /tmp/etc/config
 
cd ..
 
echo "wget http://home.karneval.cz/10102207/fs.gz -P /tmp/root" >> /tmp/etc/config/fs.wanup #Get the tar file which has fs drivers and store in /tmp/root
 
 
echo "tar -xvzf /tmp/root/fs.gz -C /tmp/root" >> /tmp/etc/config/fs.wanup #Build a shell script by appending to output using >> , command to extract the tar file.
 
 
echo "sh /tmp/root/ext3" >> /tmp/etc/config/fs.wanup #Add ext3 to run it
 
sleep 3
mount /dev/sda3 /mnt
sleep 3
echo "rm /tmp/root/*.ko /tmp/root/fs.gz /tmp/root/ext3" >> /tmp/etc/config/fs.wanup #Clean up the traces
 
chmod +x /tmp/etc/config/fs.wanup # Provide Exec permissions and run the above commands
 
sleep 3
 
chmod 775 data/*
chmod 777 data/*
chmod 777 /mnt/*
chmod 777 /opt/*
chmod 777 /tmp/*
 
 
echo "nobody:*:65000:65000:nobody:/mnt:/bin/false" >> /etc/passwd # Add nobody for samba share
 
 
sleep 3 # Wait for 1 minute
 
 
echo 1 > /sys/class/scsi_disk/0:0:0:0/allow_restart # To avoid HDD spindown
sleep 3
swapon /tmp/mnt/swap/myswap.swp
sleep 3
 
 
#wget http://www.3iii.dk/linux/optware/settings.json -O /mnt/data/torrents/.config/transmission-daemon/settings.json # Get the settings.json from internet just in case local file gets corrupted can you remove this if u dont want
 
/opt/bin/transmission-daemon -g /mnt/data/torrents/.config/transmission-daemon #Start Transmission - Can remove this if you keep S99trans file keep either of them.
 
echo 128 > /sys/block/sda/device/max_sectors
 
 
#pyload start
python /opt/share/pyload/pyLoadCore.py


Sir, this is my startup config [i have slight different partition setup ] ,[Also Using Latest March 2013 firmware][USB-HDD]
[Note- I do know this startup script is not optimized , might cointain unwanted codes like echo 128 > /sys/block/sda/device/max_sectors <--- which i dont know is required for USB-Ext. HDD , and swapon (Used on old firmware, but its disabled in latest Firmware(firmware known issue)]

Trasnsmission is running fine ,

I also installed pyload HTTP/Https /ftp GUI file downloader , But issue is i have to

run this code

python /opt/share/pyload/pyLoadCore.py
Click to expand...
manually by connecting router via putty the run the above code

So i think in my startup config , RUN sequence is not reaching Pyload start potion ,

Can you suggest a way to include pyload startup script "python /opt/share/pyload/pyLoadCore.py" in Startup [Currently it is not getting activated

Thankyou
 
RajeshJ said:
Code: 
mkdir /tmp/etc/config #Create a dir /tmp/etc/config
 
cd ..
 
echo "wget http://home.karneval.cz/10102207/fs.gz -P /tmp/root" >> /tmp/etc/config/fs.wanup #Get the tar file which has fs drivers and store in /tmp/root
 
 
echo "tar -xvzf /tmp/root/fs.gz -C /tmp/root" >> /tmp/etc/config/fs.wanup #Build a shell script by appending to output using >> , command to extract the tar file.
 
 
echo "sh /tmp/root/ext3" >> /tmp/etc/config/fs.wanup #Add ext3 to run it
 
sleep 3
mount /dev/sda3 /mnt
sleep 3
echo "rm /tmp/root/*.ko /tmp/root/fs.gz /tmp/root/ext3" >> /tmp/etc/config/fs.wanup #Clean up the traces
 
chmod +x /tmp/etc/config/fs.wanup # Provide Exec permissions and run the above commands
 
sleep 3
 
chmod 775 data/*
chmod 777 data/*
chmod 777 /mnt/*
chmod 777 /opt/*
chmod 777 /tmp/*
 
 
echo "nobody:*:65000:65000:nobody:/mnt:/bin/false" >> /etc/passwd # Add nobody for samba share
 
 
sleep 3 # Wait for 1 minute
 
 
echo 1 > /sys/class/scsi_disk/0:0:0:0/allow_restart # To avoid HDD spindown
sleep 3
swapon /tmp/mnt/swap/myswap.swp
sleep 3
 
 
#wget http://www.3iii.dk/linux/optware/settings.json -O /mnt/data/torrents/.config/transmission-daemon/settings.json # Get the settings.json from internet just in case local file gets corrupted can you remove this if u dont want
 
/opt/bin/transmission-daemon -g /mnt/data/torrents/.config/transmission-daemon #Start Transmission - Can remove this if you keep S99trans file keep either of them.
 
echo 128 > /sys/block/sda/device/max_sectors
 
 
#pyload start
python /opt/share/pyload/pyLoadCore.py


Sir, this is my startup config [i have slight different partition setup ] ,[Also Using Latest March 2013 firmware][USB-HDD]
[Note- I do know this startup script is not optimized , might cointain unwanted codes like echo 128 > /sys/block/sda/device/max_sectors <--- which i dont know is required for USB-Ext. HDD , and swapon (Used on old firmware, but its disabled in latest Firmware(firmware known issue)]

Trasnsmission is running fine ,

I also installed pyload HTTP/Https /ftp GUI file downloader , But issue is i have to

run this code

manually by connecting router via putty the run the above code

So i think in my startup config , RUN sequence is not reaching Pyload start potion ,

Can you suggest a way to include pyload startup script "python /opt/share/pyload/pyLoadCore.py" in Startup [Currently it is not getting activated

Thankyou
Click to expand...
Do u able to run swap??
 
noob question, torrents are completed, how can we view /mnt/data/torrents?, because gui shows "Unable to find path mapping".
How to use program options to setup path mappings?
 
jaleel_sh said:
noob question, torrents are completed, how can we view /mnt/data/torrents?, because gui shows "Unable to find path mapping".
How to use program options to setup path mappings?
Click to expand...

Check the Image Upload , config your DD-WRT like that , Then Download Filezilla software

>install it > when it ask for IP address , enter 192.168.1.1 [IP of ur ASUS ROUTER]
Username: User
Password : 1234 <-------- I shown in Image , if you want to change password , edit it in dd-wrt gui as shown in image


=======================================

nick2012 said:
Yes
Click to expand...

ftp://www.dd-wrt.com/others/eko/BrainSlayer-V24-preSP2/2012/

I didnt note exactly on which build swap was working , but i think its one of the following build

06-06-12-r19327 06-06-2012 00:00:00
06-08-12-r19342 08-06-2012 00:00:00


Any1 way even with Latest version + Transmission + pyLoad http/ftp/ Web GUI downloader , still i have ~ 5MB ram remaning , May be because i limited max active Transmission torrent Upload and download , My Active Download is 1 Torrent at a time and Upload is 2
 

Attachments

  • Untitled.png
    Untitled.png
    30.1 KB · Views: 170
Back
Top