Bypassing Jio Fiber Router/ONT -Guide

[anmolbhard004]

Compatible Routers/ONU that are found to be working perfectly fine with JioFiber
TP Link G3 V1
VSOL V280RH / PTF 8132 [2.5GB ONUs]
ODI/HSGQ SFP STICK 2.5 Gb

JIO uses GPON authentication and for it to work Its serial number needs to be authenticated at the ONU .
also it uses DHCP and not PPPoE unlike airtel so you dont need any username or password for it

1. Obtain the Jio Router’s WAN MAC Address
   Locate the WAN MAC address on the back sticker of your Jio router.
2. Get the 4-Character Router Brand Name and Convert to Hex [99% TIMES ITS SERCOMM ONLY]
   1. Identify the 4-character brand name on your router (e.g., SCOM) and convert it from ASCII to Hex. [ASCII to Hex | Text to Hex Code Converter]
   2. For example, SCOM converts to 53434F4D. Your GPON Serial Number (SN) will be 53434F4D followed by the last 8 characters of the MAC address, excluding colons : .
   3. Example GPON SN: 53434F4DB2C3DDHH, keep it in capital letters, although this should not make a difference.
3. Login to Your ONU
   1.And enter your GPON Serial Number in the GPON SN field.
4. Configure VLAN Settings in ONU itself
   1. Go to VLAN Settings and set the VLAN Mode to “VLAN TAG Mode” with VLAN ID as 1015.

Configure Your Router’s Internet Connection
Set the internet connection type to Dynamic for both IPv4 and IPv6.
Important: Copy the WAN MAC address as well. NOT LAN MAC


and you are done ..


for some reason your router brand is different from sercomm you need to follow this guide on github [ this is the OG guide to extract serial number from jio fiber ont a bit tricky but perfect]

github


working fine on my vsol and ubiquiti setup attaching some screenshot

 

[john1911]

Thanks for writing the post in a simple to understand way.

Does using personal ONT add any extra features to the Jio connection?

 

[anmolbhard004]

Thanks for writing the post in a simple to understand way.

Does using personal ONT add any extra features to the Jio connection?

people have reported better speeds and latency


also jiofiber is cgnat so basically if you are using their ont anf then your router you are behind triple nat by removing their ont it comes down to double nat


a con that while using 3rd party onu voice / landline wont work

 

[Walnut.nut]

Wow really impressive work man. I’m planning exactly something like this. Can I get Link to a community where I can ask related questions.

 

[anmolbhard004]

Can I get Link to a community where I can ask related questions.

you may ask here

 

[Gooblester]

Hey man I am planning to buy TP Link XC220-G3v for my JioFiber connection. It is a GPON router and also has FXS port for the telephone. Any guess will it be compatible with Jio Fiber with the help of steps you mentioned above? As i have scrolled down so many threads and most of them say Jio fiber just don’t let you connect to third party ONTs

 

[anmolbhard004]

i

As i have scrolled down so many threads and most of them say Jio fiber just don’t let you connect to third party ONTs

it does only con its very less number of onu that work with jio

 

[jayanttyagi]

Working with vsol onu.

FS: Networking Thread 'VSOL 2.5 Gbe ONU'

Nov 22, 2024

selling few 2.5Gbe VSOL ONU/ XPON.
has 2 LAN ports one 2.5 Gbe one 1 Gbe
Total Quantity -4
Works in bridge mode perfectly with Jio, Airtel, Hathway, TATA Play Fiber, Microscan.
Product link.
Will give a UPC to APC cable for 2 orders for rest will reduce price by 50 for other 2. you can easily get this cable from amazon [link]
price 2500/piece some people from

Shipping Rs 150 or best would be to get it picked up by delhivery will pack it well, will use DTDC Air if I ship.
cant ship using shiprocket cant print stickers and stick with delhivery they bring...

• anmolbhard004
• vsol onu
• Replies: 16
• Forum: User-to-User Listings

•