Bypassing Jio Fiber Router/ONT -Guide
- Thread starter anmolbhard004
- Start date
k_m_Arya
Galvanizer
TP link XZ000-G3 1-Port Gigabit GPON Terminal – Rs.1290 – LT Online Store
Specifications Quality of Service-Quality of Service control for transaction prioritization and bandwidth management Durability-Intelligent power-saving method Easy Remote Management-TR-069 protocol enables an operator to remotely configure and manage end-user devices Full Gigabit Port-Fiber...
ltonlinestore.com
This will work. I’m currently using it myself, also purchased from the same website.
Got it. Just ordered it. I was not sure if I should order from this website or not. Got a lot of reviews that it is a fraud. But since you already got it. I ll purchase it. Thanks.TP link XZ000-G3 1-Port Gigabit GPON Terminal – Rs.1290 – LT Online Store
Specifications Quality of Service-Quality of Service control for transaction prioritization and bandwidth management Durability-Intelligent power-saving method Easy Remote Management-TR-069 protocol enables an operator to remotely configure and manage end-user devices Full Gigabit Port-Fiber...
This will work. I’m currently using it myself, also purchased from the same website.
this website is not fraud , I have also purchased from this website , something else
I ordered this recently and this is working very good. https://fgtechstore.com/product/tp-link-xx530v/
Okay I have successfully bypassed Jio ONT using the provided TP Link XZ000-G3 GPON unit. I have done the following things:
1. My JIO firmware starts with ARCN so I used that for the serial number
2. Converted it to hex and appended the last 8 digits of my mac address
3. Put that in GPON SN and in VLAN set the tag to 1015
4. I am using a TP Link Archer C6 v4 router where I cloned the MAC address of my jio router.
Connection got established. BUT I am facing one problem
Now if I restart my router and the GPON unit, I don't have internet connection. I don't get assigned any IP adress dynamically. (I have set dyanmic IP in my tp link router). To get my internet working I have to press release and renew in the router settings and then I get an IP assigned. How do I solve this?
Reference steps: https://broadband.forum/threads/how...ssing-the-jiofiber-router.221140/post-1673568
1. My JIO firmware starts with ARCN so I used that for the serial number
2. Converted it to hex and appended the last 8 digits of my mac address
3. Put that in GPON SN and in VLAN set the tag to 1015
4. I am using a TP Link Archer C6 v4 router where I cloned the MAC address of my jio router.
Connection got established. BUT I am facing one problem
Now if I restart my router and the GPON unit, I don't have internet connection. I don't get assigned any IP adress dynamically. (I have set dyanmic IP in my tp link router). To get my internet working I have to press release and renew in the router settings and then I get an IP assigned. How do I solve this?
UPDATE: Got it resolved. The issue was dhcp was enabled on the GPON terminal as well, which was causing that issue it seems. Resolved it by disabling that.Okay I have successfully bypassed Jio ONT using the provided TP Link XZ000-G3 GPON unit. I have done the following things:
1. My JIO firmware starts with ARCN so I used that for the serial number
2. Converted it to hex and appended the last 8 digits of my mac address
3. Put that in GPON SN and in VLAN set the tag to 1015
4. I am using a TP Link Archer C6 v4 router where I cloned the MAC address of my jio router.
Connection got established. BUT I am facing one problem
Now if I restart my router and the GPON unit, I don't have internet connection. I don't get assigned any IP adress dynamically. (I have set dyanmic IP in my tp link router). To get my internet working I have to press release and renew in the router settings and then I get an IP assigned. How do I solve this?
Reference steps: https://broadband.forum/threads/how...ssing-the-jiofiber-router.221140/post-1673568
Last edited:
ddeswal99
Beginner
Hey I have vsol and arcn router too. Did you take hex of arcn only and added mac or whole hex of arcn + mac
Footprint4320
Apprentice
For those who are able to telnet into Jio HGW , you can get the serial from `
/var/romfile.cfg`, at least on the SCOM unit.
Code:
RIL> grep SerialNumber /var/romfile.cfg
<ONU Version="RP0201" VendorId="4899" SerialNumber="SCOMXXXXXXXX" Password="00000001"....Footprint4320
Apprentice
In addition to this, you can also transfer this file (and any other) from within the router to your System using netcat. Unfortunately the busybox binary included in the unit is pretty basic , but I was able to workaround by downloading this static build of busybox into
/flash2 and execute ./busybox nc successfullytirth0jain
Discoverer
What delivery option you picked and how long did it take to arrive?TP link XZ000-G3 1-Port Gigabit GPON Terminal – Rs.1290 – LT Online Store
Specifications Quality of Service-Quality of Service control for transaction prioritization and bandwidth management Durability-Intelligent power-saving method Easy Remote Management-TR-069 protocol enables an operator to remotely configure and manage end-user devices Full Gigabit Port-Fiber...
This will work. I’m currently using it myself, also purchased from the same website.
Footprint4320
Apprentice
I picked trackon, it arrived in 4 business days (Ordered on Monday early morning) . Although i suggest going for G7, iirc it is XPON, and ive read it is supported well. And it is like 200rs cheaper
tirth0jain
Discoverer
I couldn't find anyone who was successful in working with the G7 that's why I ordered the G3
tirth0jain
Discoverer
Im connecting the xz000 G3 V1 onu to my pc Ethernet, I have put the scom hex id followed by 8 digits of my WAN id and set vlan id to 1015 and connceted to my pc. However it doesn't show internet access still.
(Red hue because of bad display converter don't ask)
Is it smth related to DHCP or ip assignment?
Th
(Red hue because of bad display converter don't ask)
Is it smth related to DHCP or ip assignment?
Th
The V1 requires 16 digit hexadecimal and what you're saying to do is 12 Digits so how did you do?
Hey, can you help me I have bought the same product but stuck. What all did u do exactly? Also what settings did you change in your router?TP link XZ000-G3 1-Port Gigabit GPON Terminal – Rs.1290 – LT Online Store
Specifications Quality of Service-Quality of Service control for transaction prioritization and bandwidth management Durability-Intelligent power-saving method Easy Remote Management-TR-069 protocol enables an operator to remotely configure and manage end-user devices Full Gigabit Port-Fiber...
This will work. I’m currently using it myself, also purchased from the same website.
Last edited:
Looks like you are registered, so the clone thing has worked. But you say it doesn't work in your router? Are you still using jio router or any other one.
Make sure to disable DHCP on the G3 and let the router do the DHCP work
tirth0jain
Discoverer
Oh I need to disable that? I didn't. Also I don't have any other router so I kind connected the lan port from G3 to jio router hoping it'll become an access point but I think I failed there .
What I can't understand is I'm connecting the onu to my computer and it's not even giving internet there. What should I do there?
Edit: it worked! I disabled DHCP and turned on automatic IP assign. Which was said in the tutorial in the broadband forum. I did that before too but didn't work, I changed the mac address of my Ethernet adapter this time to all capital instead and it worked!
Btw, I turned of DHCP so how do I access the onu portal now? It doesn't load after turning of dhcp
Last edited: