DLink GLB-502T problems

C

cybertragic

Disciple
May 25, 2005
145
5
0
I just bought a new D-Link GLB-502T ADSL modem for use with my BSNL Dataone connection. I configured it to autodial as per instructions given on various sites and it connected properly.

However there are 2 problems neither of which I faced with my Huawei MT841.

1) The inteenet keeps disconnecting and connecting itself every one minute. I never faced this problem with the Huawei modem. What can I do about this? Its hardly usable coz it works for one minute, then disconnects and takes another 30 seconds to find the link and connect itself.
2) The ports on utorrent always show blocked. I know there is probably some way to configure it to open a certain port but on the MT841 all ports were always open and the port status on utorrent was always green no matter which port I used. Can the DLink be configured to work that way?
 
A

Anish

Skilled
May 9, 2005
6,589
107
202
34
Goa, India.
www.anishsood.com
If you Dataone connection is a new one (With the IP range in 117.xxx.xxx.xxx) then do the following.

1. Set your modem in bridged mode

2. Create a PPPoE connection using "Create New Internet Connection" wizard

3. Enter your Usrname/Pwd and connect.
 
N

Naga

Skilled
Apr 5, 2005
1,751
49
0
48
Check the log. Any specific reason it's disconnecting? You can try upgrading the firmware. What's yours? And you'll have to port forward thru Advanced>Virtual Server.
 
Hacker

Hacker

Skilled
Apr 1, 2005
1,694
11
51
Pune
Anish said:
If you Dataone connection is a new one (With the IP range in 117.xxx.xxx.xxx) then do the following.

1. Set your modem in bridged mode
2. Create a PPPoE connection using "Create New Internet Connection" wizard
3. Enter your Usrname/Pwd and connect.
Click to expand...

Why cant you put the modem in bridged mode if you have the old ip address range??
 
C

cybertragic

Disciple
May 25, 2005
145
5
0
I am sure the line quality is absolutely fine because I also have a Huawei MT841 borrowed from a friend and whenever I connect using the MT841 it works perfectly and disconnects only after 24 hours. However, the 502T always disconnects every 1 minute. Is it because the "Idle Timeout" on the 502T is 60 seconds by default?
 
S

sumedhmumbai

Adept
Mar 17, 2007
266
1
28
cybertragic said:
I am sure the line quality is absolutely fine because I also have a Huawei MT841 borrowed from a friend and whenever I connect using the MT841 it works perfectly and disconnects only after 24 hours. However, the 502T always disconnects every 1 minute. Is it because the "Idle Timeout" on the 502T is 60 seconds by default?
Click to expand...

ya u r correct change that to high or use the on demand option
 
C

cybertragic

Disciple
May 25, 2005
145
5
0
Well, obviously that's the first thing I'd have done except the idle timeout part is greyed out and there's no way to change the default 60 seconds. Any1 here have a glb-502t and can help?
 
L

linuxtechie

ex-Mod
Aug 9, 2007
1,495
37
112
124
www.linuxtechie.net
Hmm mine remains "ON" for days, so here is my setting:
7198


Clipboard01.jpg

Clipboard02.jpg

Clipboard03.jpg

Clipboard04.jpg

Clipboard05.jpg

Clipboard06.jpg

Clipboard07.jpg


Helps?

~LT
 
V

virtua_pirate

Adept
Nov 17, 2007
266
3
29
37
www.orkut.com
^^^ do you have parallel line at your place...if so, use a splitter before the parallel lines...also what is the snr margin you are getting...???

also ensure that "manual" has been checked in your routers setting...you'll find it in advanced->ppp.
 
M

manuvikram

Recruit
Feb 15, 2008
5
0
51
i dont know wat that means...a new beeeeee to networking man......

if am not wrong there is aspliter...which splits the mail line to dsl and phone....actuallly ma system is placed bit too far 4m the phone so am useing an extention phone liine which i connected in that spliter's dsl port.....then the other end to the glb 502t router...thats wat alll i know..it was working man...it keep dicoonecting.....wat to do..is it any prob with the router or the settings...please
 
manuvikraman

manuvikraman

Adept
Mar 30, 2008
721
145
133
Kerala, Currently in Germany
i dont know wat that means...a new beeeeee to networking man......

if am not wrong there is aspliter...which splits the mail line to dsl and phone....actuallly ma system is placed bit too far 4m the phone so am useing an extention phone liine which i connected in that spliter's dsl port.....then the other end to the glb 502t router...thats wat alll i know..it was working man...it keep dicoonecting.....wat to do..is it any prob with the router or the settings...please
 
Top Bottom