GauravDas
Beginner
I had to bump down VRAM clocks from 2800 MHz to 2700 MHz. Oddly enough everything was stable on Cyberpunk and Witcher 3, but I encountered screen corruption on Metro Exodus and Marvel's Midnight Suns.
I have also been messing around and benchmarking with Optiscaler, and have to say, it is an amazing piece of software. You can use it to switch between XESS, FSR 2/3/4, and also allow frame generation on 9070 XT with a couple of ways.
Here's some settings I got working using Optiscaler with different games:
I am thinking of permanently running with -30% TBP, which would be great for indian summers. Will try some additional performance tuning and see how much performance I can claw back.
Well that didn't take long. Here's updated tuned settings for my Sapphire Pulse 9070 XT:
That said TechPowerUp says the 9070 (non-XT) has 90% of the performance of a stock 9070 XT. If you have power or cooling constraints, then I would definitely recommend to be on the lookout for good deals on a 9070. I see an ASRock model listed for 63K on Vishal Perhiperals which seems quite good value to me.
I have also been messing around and benchmarking with Optiscaler, and have to say, it is an amazing piece of software. You can use it to switch between XESS, FSR 2/3/4, and also allow frame generation on 9070 XT with a couple of ways.
Here's some settings I got working using Optiscaler with different games:
- Metro Exodus Enhanced Edition: DLSS → XESS + no FG (FSR4 causes artifacting, OptiFG doesn't work)
- Blacktail: DLSS → FSR4 + OptiFG + Reflex (works flawlessly)
- Horizon Zero Dawn (non-remastered): DLSS → FSR4 + no FG (OptiFG causes judder)
- Marvel's Midnight Suns: DLSS → FSR4 + DLSS FG + Reflex
- Witcher 3 (next gen): DLSS → FSR4 + DLSS FG + Reflex
- Cyberpunk 2077: FSR3→ FSR4 + DLSS FG + Reflex
- Deep Rock Galctic: FSR2 -> FSR4 + Reflex (didn't try OptiFG as frame rate is already high)
I am thinking of permanently running with -30% TBP, which would be great for indian summers. Will try some additional performance tuning and see how much performance I can claw back.
Well that didn't take long. Here's updated tuned settings for my Sapphire Pulse 9070 XT:
- Total Board Power: Stock → -30%
- GPU Voltage Offset: -50 mV → -70 mV
- VRAM Clock Speed: 2700 MHz (unchanged)
- VRAM Memory Timing: Fast (unchanged)
That said TechPowerUp says the 9070 (non-XT) has 90% of the performance of a stock 9070 XT. If you have power or cooling constraints, then I would definitely recommend to be on the lookout for good deals on a 9070. I see an ASRock model listed for 63K on Vishal Perhiperals which seems quite good value to me.
Last edited: