Post your overclocks !

Argus, one hell of a o/c mate, great going :D

why are you so worried about temp's, nothing wrong if your temp reach 40'c on load at room temp, did you check without a/c, how high do they climb ?
 
lol i remember last time i left prime all night and was out all day next and when i came back i found prime failed after 26 hours ... would ya call that stable or not :P
 
^ Ooh ok, does that mean if his system is on for 24*7 the a/c would be on too, he has some tough choice's to make, but a great o/c nonetheless.
 
^^ my sys IS on for long hrs..but this is just a test OC..just to see how far can i push the rig.

my 24/7 OC is at 275HTT...so no probs there :)
 
------------------------------------------------------------------------
Hi Guys

I got a new week Venice finally.[Swapped with my 0545] ;)

Actually the one which i wanted for me since the start. :ohyeah:
Ne guesses :D

So here are the overclocking results that i managed with it.

Some thing is holding my OC donno what.

I feel its the PSU or the Ram.

Max Settings

HTT = 325
HTT Mul = 3
Vcore = 1.60

Ram Divider = 2:3
Ram speed = 2.5-4-4-8-1T
Vdimm = 2.85

Cooling used
AirCon as my stock cooler cant handle this load.
CPU still has stock cooler.
GPU has Ati Silenecer.

Images

CPUz

325httcpu8yv.jpg


CPUz



Everest Ram Latency



Everest Temparatures



Everest Ram Mem Read



Everest Ram Write



Super PI 1M with CPUz


Guys the PC even booted with 330HTT and also did one round memtest
But i feel the Vcore was less for it , it couldnt load into windows.

What could be the reason for this.

I had applied 1.62Vcore @ 330HTT.

Just close to 3G.
I feel this chip has to do some burnin to clock more.

------------------------------------------------------------------------

Main Thread Regarding discussion on this:
Link:- http://www.techenclave.com/forums/so-close-yet-so-far-66301.html
 
I was trying to push my AMD system a bit which otherwise runs at stock.

I just pumped up the FSB a bit. The Everest memory read speeds look nice.:)

Super Pi 1 million is still not below 40 seconds though :(

 
Hmmm Nice one there... Are you sure M/B sensors correct... Cause my one on ASUS is all :S...

This means the burn in process helps in lowering down vcore... Nice... But i see the temps a tad high... Try putiing it to default Vcore and see the temps...

OT: Your siggy colors gives a headque :S... Change all to either light or dark :P... Tough to read...
 
yeah rahul, for the vcore of 1.35 the temp is is on the higher side... i get that temp when i give 1.65vcore(i meant the CPU temp).
 
Top Bottom