lavans4u
Contributor
Post your overclocks !
- Thread starter bottle
- Start date
salman8506
Guide
E5200 4.25GHz
E7300 3.88Ghz
Pentium D 925 4Ghz
Q6600 3.52Ghz
The e7300 & q6600 had more potential but i played safe. Will try to hit insane speeds when i will be upgrading.
hyeah:
E7300 3.88Ghz
Pentium D 925 4Ghz
Q6600 3.52Ghz
The e7300 & q6600 had more potential but i played safe. Will try to hit insane speeds when i will be upgrading.
hyeah:
everything is on stock cooler only
i tested auto(1hr) occt mix, everything is stable with max temp of 48C at full load on both cores
i was able to reach 3.63ghz at 1.25vcore(stock) fully stable and didnt try anything further at all, but in gta4 benchmark i just found improvement of 1fps (meh) so i came back to 3.3ghz where i got an increase of 7 fps + undervolt (gr8 for my 24x7 stuff) as compared to that on stock speeds at 2.6ghz where is was getting 29fps
last but not the least thanks to SidhuPunjab for this post: http://www.techenclave.com/1104877-post4.html
PLZ throw in any suggestions or questions you have
not ready to OC yet, DDR3 ram issues with stability, but
Phenom II x2 unlocked core
CPU-Z Validator 3.1
Phenom II x2 unlocked core
CPU-Z Validator 3.1
luckyishere
Contributor
This i have achieved so far...further testing for stability checks have been goin on...
salman8506
Guide
This is what i got with my shiny new Q9450 from Sidhujee HWBOT CPU-Z - 4240.24 mhz - Salman8506 - Core 2 Q9450 (2.67Ghz) @ 4240.2MHz
Well i am waiting for my new cooler to arrive to push it even further if i can
Well i am waiting for my new cooler to arrive to push it even further if i can
BHULLAR BOYS
Contributor
qatibjanmeet
Contributor
Vasishta.Sushant
Forerunner
Here are mine (Stock speeds are 2.8GHz):
980x @ 5600MHz with all cores as well as HT ON!
Nothing new and nothing record breaking.
This is just to show a GIGABYTE X58 board ( its a Pre-Production more than 2yr old board) is built not just to last overclocks & abuse but next gen CHIPS as well
hyeah:P.S Everything works - 980x as well as EX58-UD5! Also it was with LN2 @ -85c
qatibjanmeet
Contributor
de.das.dude
Contributor
hi guys! new here.
came on recommendation.
this is my overclock.
stock HSF of AMD(the aluminium one). i got a copper heatpipe one, but waiting for winter to overclock!!
cheers!
came on recommendation.
this is my overclock.
stock HSF of AMD(the aluminium one). i got a copper heatpipe one, but waiting for winter to overclock!!
cheers!
hi guys, i generally avoid OCing, but today i just tried some on my cousin's sempron 140 & it OC's to 3.44ghz with stock HSF & voltages...though i reduced HT & NB freq to be safe DDR freq slightly..
should i oc it some more, OCCT linpack, prime95 blend, superpi upto 32M runs without any error or BSODs @3.44ghz with temp max at 43c full load & 35c idle.
validation:http://valid.canardpc.com/show_oc.php?id=1441410
should i oc it some more, OCCT linpack, prime95 blend, superpi upto 32M runs without any error or BSODs @3.44ghz with temp max at 43c full load & 35c idle.
validation:http://valid.canardpc.com/show_oc.php?id=1441410
