Mobile Phone Screen Protectors
- Thread starter gmano
- Start date
- Status
I have surprisingly received my post much earlier than I expected. Will try it out later. Thanks Mano..!
^^ I know. But everytime I'm sent a speed post from Pondicherry to Indore, it used to take 1 week to 10 days for it to reach me. This is the first time I'm getting one in 3 days.
About the protectors, I'll apply them later in the evening and let you know.
About the protectors, I'll apply them later in the evening and let you know.
Ok.. short(est) review:
Screen guard is of very good quality. At least I couldn't observe any difference between my old screen guard (which was worth 250 bucks) on my Nokia 3110c and the new one in relation to thickness. I was able to apply protectors for both my Nok 3110c and my 5320XM without any problems. Sizes for the mentioned models are absolutely spot-on.
I can't comment about the life or residual glue, etc. for obvious reasons.
Hope that'll remove the doubts from the minds of people who are confused. Its absolutely worth buying. :hap2:
Screen guard is of very good quality. At least I couldn't observe any difference between my old screen guard (which was worth 250 bucks) on my Nokia 3110c and the new one in relation to thickness. I was able to apply protectors for both my Nok 3110c and my 5320XM without any problems. Sizes for the mentioned models are absolutely spot-on.
I can't comment about the life or residual glue, etc. for obvious reasons.
Hope that'll remove the doubts from the minds of people who are confused. Its absolutely worth buying. :hap2:
I have a blackberry with a screen guard but was not very good quality as cmpared to Rinco.
I rxd my pack today & ripped off the old one...Read the instaructions, cut the guard to size after marking with sketch pen..& applied it.. As I was used to the old one (Bad quality), It didn't occur to me that Rinco has two covers - one at top & one at bottom (sticky side). SO I just stuck the guard & found that the display is better than the earlier one & hence left it at that
Later I was just tweaking the cut pcs & realised that (no2) side also has to be removed. I managed to locate the edge on my BB & removed the top layer & suddenly display became so clear that I was wondering if I have removed the guard itself.. I had to actually feel the edges again & chked with a lens to confirm that guard is firmly fixed.
Man - Rinco quality is amazing.. and price is unbeleivable..Just go for it..
Steps:-
1. First measure the guard wrt to ur phone screen & mark with a skecth pen - area u need to cut.
2. Cut & then Remove pen marks with a soft cloth. Also round of the edges else ur gyuard will start peeling after some usage.(This is my exp - urs may be diff)
3. Claen the screen with the cloth provided. I found that a bit of steam helps in case screen is dirty or u have an old guad which is to be removed.
4. Onc the screen is shiny & clean, peel no 1 for abt 1/2 inch, align it with the screen edge & while pulling at no.1, keep rubbing in straightline on the area stuck on screen with the cloth - to ensure that no airbubbles are trapped. If u find bubble, just pull it back & again apply. This is the critical part whch can result in a masterpiece or a ruined guard.
5. Keep pulling 1 & once it is pulled out completely, lightly rb teh cloth on screen to ensure that all corners et are well stuck.
6. Post this, pull at no 2, this will remove a thin - non sticky plastic shet from top.
7. Pl note that no 1 is sticky to touch as it is touching the sticky pat of guard while no 2 is just a static cover - top of scarath guard - which is not sticky.
Now u just sit back & thank gmano for giving u a nice & clear vision
PS excuse my spelling msitake,, my KB isnot too good & I type fast
:hap2:
hyeah::clap::rofl::hap2:hyeah::rofl:
I rxd my pack today & ripped off the old one...Read the instaructions, cut the guard to size after marking with sketch pen..& applied it.. As I was used to the old one (Bad quality), It didn't occur to me that Rinco has two covers - one at top & one at bottom (sticky side). SO I just stuck the guard & found that the display is better than the earlier one & hence left it at that
Later I was just tweaking the cut pcs & realised that (no2) side also has to be removed. I managed to locate the edge on my BB & removed the top layer & suddenly display became so clear that I was wondering if I have removed the guard itself.. I had to actually feel the edges again & chked with a lens to confirm that guard is firmly fixed.
Man - Rinco quality is amazing.. and price is unbeleivable..Just go for it..
Steps:-
1. First measure the guard wrt to ur phone screen & mark with a skecth pen - area u need to cut.
2. Cut & then Remove pen marks with a soft cloth. Also round of the edges else ur gyuard will start peeling after some usage.(This is my exp - urs may be diff)
3. Claen the screen with the cloth provided. I found that a bit of steam helps in case screen is dirty or u have an old guad which is to be removed.
4. Onc the screen is shiny & clean, peel no 1 for abt 1/2 inch, align it with the screen edge & while pulling at no.1, keep rubbing in straightline on the area stuck on screen with the cloth - to ensure that no airbubbles are trapped. If u find bubble, just pull it back & again apply. This is the critical part whch can result in a masterpiece or a ruined guard.
5. Keep pulling 1 & once it is pulled out completely, lightly rb teh cloth on screen to ensure that all corners et are well stuck.
6. Post this, pull at no 2, this will remove a thin - non sticky plastic shet from top.
7. Pl note that no 1 is sticky to touch as it is touching the sticky pat of guard while no 2 is just a static cover - top of scarath guard - which is not sticky.
Now u just sit back & thank gmano for giving u a nice & clear vision
PS excuse my spelling msitake,, my KB isnot too good & I type fast
:hap2:
hyeah::clap::rofl::hap2:hyeah::rofl:
Recd mine today, excellent quality was cut to exact specifications for my phone.
Here's how much these go for on ebay- eBay India: Screen Protector for ANY NOKIA MOBILE PHONE-RINCO (item 180391897724 end time 09-Aug-2009 01:50:30 IST).
Thanks for this gr8 GO sir.
Here's how much these go for on ebay- eBay India: Screen Protector for ANY NOKIA MOBILE PHONE-RINCO (item 180391897724 end time 09-Aug-2009 01:50:30 IST).
Thanks for this gr8 GO sir.
^^^ Speed Post is good option, most of the members received their posts within a weeks time. 25 rs for 50 grms flat rate (one India) can not be beaten by any Private courier.
Tracking numbers:
Dilip Rathod - ET258612007IN
Sathyanaidu - ET258611987IN
Rahul Goyal - ET258611995IN
Tracking numbers:
Dilip Rathod - ET258612007IN
Sathyanaidu - ET258611987IN
Rahul Goyal - ET258611995IN
- Status