PiHole should be a must

Julian said:
Maybe they're closing down? J/K but just read this half hour ago

www.businessinsider.in

| BusinessInsider India

www.businessinsider.in www.businessinsider.in
Click to expand...

:D :) no that's not it - Allahabad bank is now Indian Bank (merge into) and it will merge something else.... i,e into the Final 4.

Just before the festival ICICI Bank failing in everywhere Unsuccessful NEFT, declining UPI payment request, Failed Online Transaction / Debit card payment but later it turns out the technical issue.
 
dissel said:
Anybody can confirm they can open this page using PiHole


Banks like SBI, ICICI, IOB are working - The only non-working bank is the above.
Click to expand...
Went till Login popup , No issues
tech.monk said:
Works for me on PiHole. Check your blocklist.

medium.com

Replacing Pi-hole with NextDNS

A guide to replacing Pi-hole with NextDNS, unlocking DNS-over-HTTPS and managed ad blocking.
medium.com medium.com

We can replace pi-hole with next dns on raspberry pi - this is worth checking based on the comments on this thread and overall information flowing around on the same stuff across internet.
Click to expand...
i was using NextDNS in Pi but free queries is only 300000 so if many devices then this limit will finish
In this tut PiHole has been replaced but 300000 query issue still exists
 
  • Like
Reactions: dissel
kuduku said:
Went till Login popup , No issues

i was using NextDNS in Pi but free queries is only 300000 so if many devices then this limit will finish
In this tut PiHole has been replaced but 300000 query issue still exists
Click to expand...

I just tried NextDNS and Adguard on my setup to test. For me, the Adguard is much more effective at blocking ads that were shown on the test page.

I am glad that it turned out that way as I don't have to bother about the 300k queries limit now
 
Mumbgamer said:
Hmm port triggering on my tp link router seems to be what i would need?

Or maybe using the virtual servers option?

How to Setup Port Triggering on a TP-Link router (New Logo UI)

How to Setup Port Triggering on a TP-Link router (New Logo UI)
www.tp-link.com www.tp-link.com
Virtual servers

But i don't see option to redirect traffic to specific ip on network
Click to expand...
I have the same issue with my tp link router as well. Virtual servers seems to be only for public incoming traffic. Port triggering doesn't have target ip option.
 
kuduku said:
Went till Login popup , No issues

i was using NextDNS in Pi but free queries is only 300000 so if many devices then this limit will finish
In this tut PiHole has been replaced but 300000 query issue still exists
Click to expand...
I'm missing something here... why we need RPi if we go for nextdns? just configuring DNS server in the router is enough right?
 
smnrock said:
I'm missing something here... why we need RPi if we go for nextdns? just configuring DNS server in the router is enough right?
Click to expand...
Only DNS server doesnt give best results . You have to add other blocklists to include most popular ones - StevenBlack , Energized Ultimate and oisd-nl
U can test it also
Add NextDNS DNS in router
test on https://canyoublockit.com/extreme-test/
Add uBlock Origin in Firefox /Chrome with above blocklists
Test DNS + uBlock on https://canyoublockit.com/extreme-test/
Try all permutation and combinations
With piHole you wont have to install uBlock or comparable app in all devices

DNS in router and uBlock Origin in all devices is comparable to PiHole
 
Last edited:
smnrock said:
Earlier i used to run pihole in RPI 3+ when i was using asus router. Later once i moved to Google wifi router, i did not configure pihole and left it. Recently decided to setup pihole again as the Ads are too much now a days and most of the ads in mobile browser covers entire screen :(. Since pihole needs a seperate setup and a device, i was looking for cloud based system, thats when i found out NextDNS. It was easy to setup and so far free account is fine for me. I configured NextDNS dns servers in my google wifi router and run a automatic task in Firestick to update my public IP to the NextDNS by calling their URL. Since firestick will be running almost whole day, i setup Automagic(alternative to tasker) to call the URL provided by NextDNS for every one hour.

So far this setup working fine.
Click to expand...
Is there any other advantage of running NextDNS over Pihole ? You can run pihole on the cloud.
There was some controversy on NextDNS -
https://www.reddit.com/r/privacy/comments/jswghu
 
  • Like
Reactions: booo
Changed my DNS to AdGuard DNS . Blocking increased to 48% . Nothing seems to be broken till yet
1.jpg
 
  • Like
Reactions: LaatSahab
babhishek said:
honestly, its good however a pi is not doing anything much you can do with a very powerful router with ad block, plus some always on vpns on devices. pi is great for home wifi, same devices on 4g will be hit the moment you switch over from wifi to mobile data.
Click to expand...
I fix this with DoT and running two instances of Adguard Home.

My DoT/DoH server runs at, xyz.com.

First instance runs in my home network and rewrites dns query to xyz.com to 192.168.2.3(which is the IP address of machine running Adguard Home in my network). This way, All machines in my home network are using the local Adguard instance over just normal DNS/DoT/DoH.

When I am not on the home network, xyz.com resolves to the public IP of the VPS on which I am running adguard home and it continues to work over DoH/DoT. (I have normal DNS disabled on the VPS because of bots and other parties probing it and un-necessarily increasing load on the machine).

In Android, I have xyz.com set as the value in Private DNS field.
In Firefox, I use https://xyz.com/dns-query as the DoH endpoint.
Similar thing on Windows.
Haven't yet figured this out on ios without using a third party app. They have supposedly added DoT support in ios 14 but it's weird. :/
 
Thanks to kuduku’s blocklist, I too have 2.6 million domains on blocklist. Didn’t get much false positives, had to manually unblock one domain till now.
 
I think this is easily doable if your router is a bit powerful and supports scripting/api. You can write simple scripts and a cron job to crawl adblock lists regularly and update the DNS entries.
 
kanishk619 said:
I think this is easily doable if your router is a bit powerful and supports scripting/api. You can write simple scripts and a cron job to crawl adblock lists regularly and update the DNS entries.
Click to expand...
Yes for you but not for us normal souls . You might not remember but u had repaired my Pogoplug Pink , added 3.5mm serial port . I again messed it up during an update . From that time its lying bricked .......Otheriwse i would have done this on Pogoplug only
On a lighter note can i send it again to you ;);)
 
  • Wow
Reactions: kanishk619
Hey
kuduku said:
Yes for you but not for us normal souls . You might not remember but u had repaired my Pogoplug Pink , added 3.5mm serial port . I again messed it up during an update . From that time its lying bricked .......Otheriwse i would have done this on Pogoplug only
On a lighter note can i send it again to you ;);)
Click to expand...
I was thinking about your TE username that I might've interacted with you earlier at some point but actually forgot. If I've to avoid the Raspberry route, I can easily do this to my Mikrotik router using builtin scripting or using the API. You can do this to any almost any device if it does't bottleneck and puts any restriction on the entries.
 
Top Bottom