Post your overclocks !

send it to funky, he'll blow it for u :P

@Sandy..hmmm..used it as a siggy already? :P
 
Last edited by a moderator:
hehe Funky how about telling me how to blow this cpu? I am serious. :)

@Sunny.. hehe nice na? but not as good as your Nokia 7610 :P lol
 
Last edited by a moderator:
Hey Sandy are you gone crazy , if u wanna blow the cpu give it to me.
I will put it to some use ;)
or sell it here on TE and get something else from that money.

such things related to blowing up must not be encouraged is what i feel personally.
 
Then you have an added reason to blow it up !

Why not ask them to do it for you, or call them over and do it in front of them :bleh:
 
new OC nothing gr8 about the processor but the ram really rocks .... haven't pushed it much .... this was mine first try .... anyways PCjedi helped me a lot on this ....



actually this twinmos don't like any lose timings ..... runs fine on stock timings .... if i try to losen the timings it gets worst ..... anyways wat else u expect from a 5k ram .... :D
 
Nice OC there Rahul.

wat else u expect from a 5k ram ....
Click to expand...
The orignal Hynix D43 which i am getting from Funky does 250-265 at 3-4-4-10 .
Darky did 297 on his DFI at relaxed timings.
This is what value hynix ram can do. ;)

Also i have heard that Venice loves Tight timmings over More Mhz.
But if ur Ram can go higher with tight timings then its icing on the cake.[not possible with value ram]
 
What do you mean Rahul?? 2.7 GHz is damn good. You have an amazing oc'ing Venice there.... Lucky guy!!!

@anarchy ---I know this is late, but I did not come across this thread till today. Nice oc and nice legs. But I would love to look at the face.
 
Last edited by a moderator:
Quad Master said:
Nice OC there Rahul.

The orignal Hynix D43 which i am getting from Funky does 250-265 at 3-4-4-10 .

Darky did 297 on his DFI at relaxed timings.

This is what value hynix ram can do. ;)

Also i have heard that Venice loves Tight timmings over More Mhz.

But if ur Ram can go higher with tight timings then its icing on the cake.[not possible with value ram]
Click to expand...

just look at the timings dude ..... and here we are talking about 512MB dual side sticks ..... anyways i have also taken my kingston KVR to 280Mhz with losen timings .... :D .... but the bad thing about twinmos is it doesn't like lose timings so u can't have insane speeds like D43 with lose timings ..... :)

EDIT:- and this is stable settings not suside screenshots i have run crystal mark and 3dmarks03 with these setting .....

@Nikhil thanks buddy ...... lemme get a new PSU then i will try to push it more ......
 
Last edited by a moderator:
D43 is no good for a64. Tight 2-2-2-5 timings at 200MHz is way better than 3-4-4-8 at 250 for a64 chips. For P4, its a different story though.
 
CPU Clock Speed 2651.1 MHz
Clock multiplier x 11.0
HTT Bus Frequency 241.0 MHz
L1 Data Cache 64 KBytes, 2-way set associative, 64 Bytes line size
L1 Instruction Cache 64 KBytes, 2-way set associative, 64 Bytes line size
L2 Cache 1024 KBytes, 16-way set associative, 64 Bytes line size
L2 Speed 2651.1 MHz (Full)

dunno how2post pics :) crop them n make them small size :P

temp is abt 34 rite now, on booting was 36 proccy n 32mobo...
 
My OC result, so how is this guyz???

Here is my result





got 36.701s in spuerpi 1M test.

My temperature at load



This is it for now untill i buy a good heat sink for the CPU ;)

and here is my 3d Mark 05 result



got this at 550/1150, overclocked only for Bechmark(used detect optimal settings which gave me 565/1160 but reduced coz i was afraid a bit).

So how is this guyz? not bad????
 
Well my ram is doing only 226Mhz, so had to stop here. i think my venice can do more, but i'll push it only after i buy Xp-90, such that i'll bring the ram to DDR 266MHZ, then increase the HTT by increasin the Vcore. This OC is only with the stock HSF.
 
Good temps and yeah take it easy don't push too hard you will get up there soon !

Nice 3D Mark score a perfect 4k eh :|
 
Top Bottom