OC & Modding Post your overclocks !

goldenfrag said:
You dont wanna push your VCore to 1.5V on Air. Unless you wanna fry your Prescott.
My Pentium D 820 (Smithfield, essentially 2 Prescotts) gave me 3.73 Ghz @ 1.3850V.) You should get it stable at 1.4V really. Coz there isnt much of a difference in Prescotts.
Click to expand...

that wat not stable GF ..... remember 3Dmarks 06 ;)
 
dab said:
Here are the system specs:
The Company
CPU: Intel 3.0E HT 3000MHz @ 3750MHz
Motherboard: Asus P4P800-E Deluxe
Memory: 2048 MB of OCZ Premier DDR400 @ 2.5 3 3 7
Video Card: BFG Tech 6600GT OC Nvidia GeForce @ 565 / 1.12
Hard Drive: WD4000YR 374.0 GB @ 7200 RPMS
Monitor: Idek Iiyama Vision Master Pro450
DVD R/W: Toshiba
Storage Interface: SATA
Operating System: Windows XP Professional SP2
CPU/GPU seated on Arctic Silver 5
Zalman CNPS7000B Al-Cu
Antec P160W Chassis
Enermax Liberty 400W
Logitech MX510
Click to expand...

wat are ur temps @ full load ....
 
I still haven't gotten it stable enough to hold 3.75 and benchmark. Any tips on how i can do this?

It will post as high as 3.9 but won't boot into windows..
 
Added Supload link too Rahull... Now can you make out something...

@storm... Well... I was playing around with Ram :p... Was kidda lazy to go in the Ram settings and change the divider as on ASUS boards it opens up on a different page... :p
 
Nice OC switch :p gift me that RAM and ill show u how its done (OCZ i mean :p )

here is what am running my proccy at the moment, prime stable for 1 hr... will push more after sometime...

 
yeah seen that switch ..... nice OC .... but ur chipset fan is running @ 8881RPM :-O isn't that loud ..... me going to reduce the vcore again ,,, :)
 
looks like i got a laptop proccy :D ......

2527Mhz@1.30v

well superpi 32M stable don't have time to do prime95 ..... willl try today nyt ...

 
Rahul said:
looks like i got a laptop proccy :D ......

2527Mhz@1.30v

well superpi 32M stable don't have time to do prime95 ..... willl try today nyt ...

Click to expand...

wahhh... awesome proccy u got there man

can tell me waht stepping it is, or opps, u already mentioned it... but great never the less

lemme know if u decide to sell it :p
 
E3 have tendency to oc upto 2.4-2.5ghz undervolting.

I think u will find few results pages ago of the same. I have got it perfectly stable at stock speed at around 1-1.1v if i remember correctly.
 
funkymonkey said:
E3 have tendency to oc upto 2.4-2.5ghz undervolting.

I think u will find few results pages ago of the same. I have got it perfectly stable at stock speed at around 1-1.1v if i remember correctly.
Click to expand...

well the best i tried with my venice was 2.3 gig at 1.35v, havent gone any lower coz im trying to see the max stable speed this chip does... is 20th week venice btw, nothing too great..
 
well was running prime for some hours, about 4 hrs i think, dont remember exactly, see the pic and see what hrs it shows :S

any explaination?? :S

 
^^ ur CPU's screwed.. if i were u i wud run it at stock from now on.. n if u continue, it'll screw up ur board too .. :S ^_^ kekekekekekek
 
Back
Top