CPU/Mobo Problem with my new Galaxy 650i Board

[X-Rebel]

Hey friends, my 650i blew up, and i gt new 650i in replacement.

On my earlier 650i, my E2140 easily ran at 2.8GHz on Auto Voltage, and after increasing the Voltage ran at 3Ghz.
But on the new board, it doesnt even cross 2.6Ghz in the BIOS, and even at 2.6Ghz it crashes after some time of heavy load.
Its stable only at 2.4Ghz.

I have updated the BIOS to the latest one. But still this problem persists. Any solution friends.

 

[Gannu]

Any problem with the PSU???

Try reconnecting all power connectors.. The 24pin ATX n 4 pin power connecors on the mobo..

 

[X-Rebel]

No, PSU is same ... no extra hardware added. Can this be a board problem or any other issue ... temps are infact lower than earlier due to applying MX-2.

 

[X-Rebel]

Help needed friends.

 

[techfreak]

May be a capacitors might be of defective or of low quality in the mobo.which making the crahes .Also try changing the Smps.. If the mobo blow up then smps must have taken some damage.confirm this

 

[X-Rebel]

Actually the MoBo dint blow, just it was some BIOS issue.

Will test the SMPS on another system.

 

[stalker]

did you update your bios?? p03 bios for tension free ocing...

 

[Dinesh_Malhotra]

well it can be ur BIOS...
as well as its good to know that every mobo is not the same.
some mite provide better OCin support , some mite not !

mine earlier Gigabyte G-965 was one hell of a MOBO.. it dint let me OC anythin whereas my frnds hvin the same board were havin all the fun

still try wat stalker said !

 

[HailStonE]

Could be the mobo issue.... Not all mobo from same Company & model overclock alike... Update the BIOS & then try your luck...

 

[X-Rebel]

Ok friends.

Stalker can u provide me a link to download the latest BIOS ?

 

[Dinesh_Malhotra]

URL http://www.szgalaxy.com/serve/download/650i_Ultra.zip

here`s the link for P04 Bios

 

[yogi7272]

use p03 bios .. found it pretty good for my q6600

 

[X-Rebel]

Can you please tell me the steps for updating the BIOS. I am a bit unclear about it.

 

[X-Rebel]

Guys, the BIOS update really helped, using the latest BIOS from the lkink provided by Dingemini.

Now running it very stably @ 2.8Ghz .. even 3GHz was stable but prefer running at 2.8GHz.

Is it ok if the system is started 4-5 times a day ??

 

[Jaspreetrattan]

Guys, the BIOS update really helped, using the latest BIOS from the lkink provided by Dingemini.

Now running it very stably @ 2.8Ghz .. even 3GHz was stable but prefer running at 2.8GHz.

Is it ok if the system is started 4-5 times a day ??

i think there wont be any problems