PogoPlug Pro - Discussion Thread

[varkey]

The very first result maybe? -- Aaron Randall - Software Developer: Installing a BitTorrent client on the Pogoplug

Or you can install Archlinux or Debian, ArchLinuxARM site has guides for all devices I believe.

 

[Vagabond]

Didn't find anything for this A-1 model. It's lying unused

 

[varkey]

The above link I posted should work on all even if its not explicitly mentioned, why don't you give it a try.

- - - Updated - - -

And ArchLinuxARM does work -- http://archlinuxarm.org/platforms/armv5/pogoplug-series-4 - Come on its not that hard to figure out Pogoplug Mobile and the Pogoplug Series 4 are based on the same architecture.
pavan547

You really need to spend some more time searching.

 

[Vagabond]

I checked that link its for model with usb 3. 0
My model A- 1 don't have any 3.0 port.

 

[varkey]

I checked that link its for model with usb 3. 0
My model A- 1 don't have any 3.0 port.

I give up if you still can't understand.

- - - Updated - - -

All instructions you need were already given to you long back -- http://www.techenclave.com/networking/pogoplug-pro-discussion-thread-125193/p30/

If you still cannot go through them and keep saying that your version is not supported and blah blah blah, please do all of us a favor and leave the device as it is. :|

 

[Nalin]

I checked that link its for model with usb 3. 0
My model A- 1 don't have any 3.0 port.

Well number of usb ports doesn't matter,
What matters is architecture which is ARMv5te ie. same on both E02 and Series 4

So give it a try

 

[Vagabond]

@varkey
Sorry mate I myself frustrated after buying the wrong one...
I will give another shot.

 

[Nalin]

So after messing with the transmission again i managed to make it work again,

Actually i am changing the wrong config file

/root/.config/transmission-daemon/settings.json

Actual file to configure is

[FONT=monospace]/[/FONT]var/lib/transmission/.config/transmission-daemon/settings.json

This make the transmission work after all, but how do i make sure that all settings will remain unchanged after the reboot :unsure:

 

[varkey]

@Nalin : Stop transmission and then edit the file. Do not edit while its running.

 

[Nalin]

Nalin : Stop transmission and then edit the file. Do not edit while its running.

Yup ,that's what i did
Can you tell me how to change the steady orange light to some different color like blue

I am pretty sure that it can be done or it can't

 

[dinjo]

proled but it works only with OXNAS

 

[Nalin]

^ So that means it will not work with pogoplug.

 

[Vagabond]

stuck at very beginning -

I was following Aaron Randall - Software Developer: Customising your Pogoplug

I enabled the ssh via mypogoplug.com

used putty as suggested my Aron Randell

login as: sshroot@192.168.0.104
sshroot@192.168.0.104@192.168.0.104's password:
Access denied
sshroot@192.168.0.104@192.168.0.104's password:


I am unable to get the access here, what am I missing ?

Using Dlink 600L and 4 gb pen drive...

 

[Nalin]

^ Use root as id/password.

 

[Vagabond]

^ still saying Access Denied

- - - Updated - - -

I shall put this in giveaway thread :annoyed:

 

[Nalin]

Login as : root
password : root

This should do the trick

 

[Vagabond]

login as: root
root@192.168.0.104's password:
Access denied
root@192.168.0.104's password:

 

[varkey]

pavan547

You really need to search more -- How do I enable SSH? : Pogoplug Help Center

And why are you logging in as "sshroot" ?

 

[Vagabond]

^ I followed Aron Randell

 

[varkey]

That guide does not ask you to login as "sshroot" or "sshroot@192.168.0.104"