OC & Modding Post your overclocks !

[Quad Master]

@bottle - can you elaborate more on this.

" If u set it by a64 tweaker to 14 then memory overclocks as good as in 200 divider."

@Stalkersoftware - thanks buddy for the memory bw info.
are the micron modules available here

 

[bottle]

@bottle - can you elaborate more on this.

" If u set it by a64 tweaker to 14 then memory overclocks as good as in 200 divider."

theres a windows based utility called a64tweaker that you can use to adjust your memory timings. the article suggested using that to set the TRFC timing to 14 for better overclocks

 

[Quad Master]

Hey bottle thats a gr8 peice of software.

Have you tried your hands with this software.

Currently i dont have a A64 System to test anything.

Do let me know your experiences with this software if u have tried it.

 

[JediMaster]

using Micron OEM modules rated for 400mhz.
gives me around 5.6 - 5.7Gb at 480.

I think its a li'l on the lower end - what do you have 3000+ or 3200+ ? Anyways, if you're using the A64Tweaker and if your mobo bios doesn't have that option, you could set the Max Async Latency to >= 8 ns for stability, especially if you're using 2 x 512 MB.

 

[Quad Master]

is this the XS thread u were talking abt , bottle

A64Tweaker Settings Therad
http://www.xtremesystems.org/forums/showthread.php?t=58604

or

WPCREDIT tweaks for the A64
http://www.xtremesystems.org/forums/showthread.php?t=37345&page=1&pp=25

 

[bottle]

nah i posted a link for stalker earlier msi k8n neo2 tips and tricks thread, it was a quote from there.

 

[Chaos]

Managed this with a single stick of Crucial Micron 1GB that came with an HCL machine. Still not reached the limit yet. Probably will do more if I give it more voltage. My crappy board is limited to 2.8V . Whoever says 1GB DIMMS don't overclock must be get his eyes checked

 

[bottle]

i see it but i dont believe it

unbelievable stuff

 

[TheMask]

265 @ 3-3-3-10!! sweet.. btw, how much do those sticks sell for?

 

[Chaos]

265 @ 3-3-3-10!! sweet.. btw, how much do those sticks sell for?

It costed 7.5K per GB from HCL. Wonder where they sourced this stuff from.

 

[TheMask]

now i am tempted to get Trancend 1 gig sticks (DDR400 CL3-3-3) and try my luck.. hhehheh

 

[Chaos]

Max I could manage in superpi is 38s @ 250x10. If I push the HTT any higher, I have to drop my multi to 9.5 or else cpu is not stable . Crappy nuke!

 

[Chaos]

now i am tempted to get Trancend 1 gig sticks (DDR400 CL3-3-3) and try my luck.. hhehheh

Don't bother... I have a couple of them. They are hynix d43

 

[Rockyme2002]

Hynix d43 is bad???
was planning to get a gig ....care to elaborate????

 

[Chaos]

Hynix d43 is bad???
was planning to get a gig ....care to elaborate????

It won't overclock much... No way close to the micron scores i just mentioned.

 

[Rockyme2002]

Didnt Darky do 280 or so.....
Also wudnt 2 512 b better for performance???

 

[Chaos]

Didnt Darky do 280 or so.....
Also wudnt 2 512 b better for performance???

His timings were 3-6-6 which aren't very exciting. My board is single channel so two dimms won't help. Maybe it might for u.

 

[Rockyme2002]

@Chaos
Oops :ashamed: ......sorry i meant for dual channel
Also ...wht is better ....sme increased Mhz at 2.5 or highly increased Mhz at 3??
Will be really helpfull.... :hap2:

 

[Darklord]

Hey guys,
Check this out,








Well i did this on following setup -

AMD Athlon 64 3200+
Asus A8N SLI Deluxe [Bios Rev. 1007.002]
256 x 2 Hynix D43 based Generic Chips.
80GB Hitachi PATA
XFX Geforce 6600 256MB
450Watt Powersafe PSU.

What say? Good enough ?

 

[TheMask]

Darky, u r unstoppable.. now 3GHz n 8000MBps is whats left to be cracked.. Congratulations bro..